606 UNIVERSAL SHELVING SYSTEM

Sectional extruded aluminum bookcase

Manufacturer DE PADOVA

design by
(1984)
Shelving and storage system with unmatched flexibility.
Uprights and profiles in extruded anodized aluminium with finish in satin silver, matt black, or powder coated white. Shelves and storage units in anodized aluminium sheet, finished in satin silver, matt black, or powder coated white.

- Uprights: used to create partition shelving. The uprights support these shelves and are fitted and secured to the floor and ceiling. Therefore, it is important to check the hold and tightness of the ceilings. The uprights cannot be fitted when there are false-ceilings of any kind. The uprights can be adjusted in height by 4 cm at the top and 4 cm in the lower part by adjusting the end units. The uprights must be properly matched with the profiles.
- Extensions: to be used to increase the height of uprights.
- Supports: to be used for shelving system installed with wall upright or along walls. They serve as an anchor and bracketing for wall shelving. Their use is highly recommended when shelves have to hold a great deal of weight and for all uprights that exceed 3 m in height.
- Reinforcement cross-pieces in extruded anodized aluminium with satin silver, matt black, or powder coated white. They are used solely for shelving with uprights. Cross-pieces should be attached in every span, one for each meter of height (e.g. 3 cross-pieces for 3 meters in height).
- Extruded anodized aluminium profiles with satin silver or matt black finish, or powder coated white. Used to mount and attach shelves. To be used both for wall shelving and for uprights. The spacing of the holes for the positioning of the shelves differs in the 11 cm and 39.5 cm profiles, so one or the other should be used. In case of wall profile, verify wall firmness in order to choose the ideal anchor.
- Shelves in anodized aluminium sheets with satin silver or matt black finish, or powder coated white.
- Storage units and movable internal shelves in anodized aluminium sheets with satin silver or matt black finish, or powder coated white.
- Drawer units with two or three drawers in anodized aluminium with satin silver or matt black finish, or powder coated white.
- Writing desk in anodized aluminium with satin silver or matt black finish, or powder coated white.

Dimensions

Further details

Details
Type
Bookcase, a very flexible storage device. Freestanding or wall-mounted.
 
Material
Uprights and sections in anodized extruded aluminium or white epoxy powder coated. Shelves, containers and mobile internal shelves in anodized aluminium sheet or white epoxy powder coated. Drawer units with two or three drawers in anodized aluminium sheet and desk unit in anodized aluminium, natural or painted in white.
 
Finish / Colour
Uprights: anodized satin-finish silver or white epoxy powder coated. Sections, shelves, containers, mobile internal shelves for containers, drawer units: anodized satin-finish silver or white epoxy powder coated.
 
Note
The uprights are used for floor-to-ceiling installation and can be adjusted by 4 cm at the top and the bottom. Uprights are always paired with sections. Supports: used when the uprights are placed on the wall, to attach the bookcase to the wall. Highly recommended for bookcases bearing heavy loads, and for all uprights taller than 3 m. Reinforcement crossbars in anodized aluminium, used only for bookcases with uprights; inserted in every span, one for each meter of height. The section is directly attached to the wall or combined with the upright, in the case of a divider bookcase. Section of 57, 114, 171 and 200 cm have a perforation interval of 7 cm and can be put one over the other. The sections with heights of 11 and 39.5 cm can only be used for the positioning of the single shelf (11 cm) and the single container (with door or drawers, 39.5 cm). In the case of use of wall-mounted sections, test the consistency of the wall to find the best attachment point.

Gallery of close-ups

DE PADOVA Catalogues

Videos

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA

Sectional extruded aluminum bookcase 606 UNIVERSAL SHELVING SYSTEM - DE PADOVA
DEPADOVA | Kensaku Oshiro | Archiproducts Design Selection | Salone del Mobile Milano 2016
DE PADOVA | Anna Von Schwen | Archiproducts Design Selection - Salone del Mobile Milano 2015
DE PADOVA | Lucidi Pevere | Archiproducts Design Selection - Salone del Mobile Milano 2015
DEPADOVA | Mönica Forster - Fuorisalone 2014
DEPADOVA | Patrick Norguet - Fuorisalone 2014
DEPADOVA | Anna von Schewen - Fuorisalone 2014

CASA STUDIO E.C.

Milano

/

Italy

/

2013

Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags