3D Viewer

AQUAPANEL® Exterior Basecoat

Cement-based mortar enhanced with synthetic resin

Manufacturer Knauf Aquapanel

AQUAPANEL® Exterior Basecoat is a cement-bound, synthetic resin-enhanced basecoat.
Preparation of the substrate 
AQUAPANEL® Cement Board should be securely fastend to a dry, clean  and dust-free load-carrying substructure.
Mixing
For manual application: stir the contents of the bag into approx. 
5 litres of water. Apply and work the mixed plaster within 45 minutes.
For application by machine: Add approx. 140 litres of water initially  and adjust to give a thin consistency

Related products

 - Cement-based reinforcing mortar with synthetic resin AQUAPANEL® Exterior Basecoat - white - Knauf Aquapanel Cement-based reinforcing mortar with synthetic resin A Portland cement bound filling material for full-surface skim coating to a thickness of 5 mm on AQUAPANEL® Cement Board Outdoor. It is used for basecoating of AQUAPANEL® Cement Board Outdoor when finishing with a thin layer of decorative render or paint.

Application
Apply AQUAPANEL® Exterior Basecoat - white 5 mm thick, spread to achieve a flat surface, free from irregularities. Reinforcing strips approx. 30 x 50 cm are placed diagonally from the corners of all building openings. The mesh strips must start directly from the corners beneath the mesh layer over the full surface. Next, embed AQUAPANEL® Reinforcing Mesh horizontally over the full surface, keeping it free of folds, close to the surface and with 10 cm overlaps. Laying time is approx. 15 min. Open time is approx 20 min at approx 20°C. For plaster layers with grain size < 1 mm or for easy-to-spread felted surfaces, use a 20 cm wide strip of AQUAPANEL® Exterior Reinforcing Tape over the board joints as additional reinforcement. The AQUAPANEL® Tape (10 cm) can then be omitted. 
The total dry thickness of the reinforcing layer formed from the AQUAPANEL® Exterior Basecoat - white and AQUAPANEL® Reinforcing Mesh should be a minimum of 4 mm. The rework time for AQUAPANEL® Exterior Basecoat – white is approximately 24 hours at 20°C. However, this time may be extended depending on temperature and humidity.

Knauf Aquapanel Catalogues

Cement-based mortar enhanced with synthetic resin AQUAPANEL® Exterior Basecoat - Knauf Aquapanel

Cement-based mortar enhanced with synthetic resin AQUAPANEL® Exterior Basecoat - Knauf Aquapanel
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags