Skim coat and cementitious finish for plaster
Colour paste putty for external, breathing, water-resistant, it consists of hydraulic binders, fillers of mineral origins and natural pigments, to be used as finishing paint.
• Only one coat
• No cracks
• Easy to apply
• Applicable directly onto the plaster, if this is suitably smooth
Coloured putty for surfaces plastered with Diathonite,new and old plasters, decayed or with cracks, disconnected in any way as long as they are solid and attached to the base wall; suitable for walls, ceilings of a room and for concrete.
If applied directly on the plaster, be sure of the perfect quality of the base. Apply at least 10 days after the under layer has been finished and onto the dry wall. Do not wet the under layer before the application.
1.Dilute with 10-20% of water and apply a first coat rapidly smoothing. This procedure is necessary to make the wall uniform and eliminate imperfections.
2.When the first coat is dry, apply a second one still as smooth but without diluting the product.
3.15 minutes after the application, smooth using a sponge in a clockwise direction.
Aspect Dense paste
Weathering resistance 2000 hours with no remakable changes
UV-rays resistance 1000 hours with no remakable changes
Solid content 80%
Sea salt resistance Excellent
Surface drying temperature +5°C
Steam permeability (High transpiration) μ =7
kg 1-1,5 if applied on a smoother.
kg 3-3,5 if applied directly on regular and smooth plaster.
Bucket kg 25.
See folder. By request for at least kg 500.
Store the product in temperatures between +5°C and +35°C.
Use by: 12 mouths.