3D Viewer

DOSAMATIC PP / PPSE / PPI / PPISE

Digital constant-proportional metering pumps

Manufacturer GEL

Digital constant-proportional metering pumps are fitted with:
• foot filter
• suction and delivery connections
• injection connection
• suction and delivery hoses
• level probe
• water meter with pulse output (for PPI models only)
The SE version is assembled on a 100 l. tank.
DOSAMATIC PP and PPI metering pumps, with constant and/or constant/proportional dosing, are able to dose the chemical
according the water flow thanks to the water meter with pulse output (standard in PPI model and accessory for PP model).
Dosage can be adjusted in the different modes below:
Constant: Pump doses with constant frequency according to the values set during programming.
Divide: The pulses given by a meter connected to the pump are divided by the value set during programming.
Multiply: The pulses given by a meter connected to the pump are multiplied by the value set during programming.
PPM: The pulses given by a meter connected to the pump determine the dosage according to the value of mg/l set.
Batch: The pulse given by an external contact starts the dosing. Pump can be programmed to dose a specific quantity.
Volt: The voltage supplied to the pump determines the proportional dosing according to the “min” and “max” values set during
programming.
mA: The power supplied to the pump determines the proportional dosing according to the “min” and “max” values set during
programming.
Digital constant-proportional metering pumps DOSAMATIC PP / PPSE / PPI / PPISE - GEL

Digital constant-proportional metering pumps DOSAMATIC PP / PPSE / PPI / PPISE - GEL
Digital constant-proportional metering pumps DOSAMATIC PP / PPSE / PPI / PPISE - GEL

Digital constant-proportional metering pumps DOSAMATIC PP / PPSE / PPI / PPISE - GEL
Loading Extra News
Loading event fair
Qr-code

Tags