Industrial Fire stop door
The Side sliding one leaf fire retardant door is installed onto brick or cement wall, or onto a coated frame, it is mounted on an inclined guide and can remain stopped in that position. The door is implemented with a counterweight and of a thermal fuse or of an electromagnet. In case of fusion of the thermal fuse or in case of release of the electromagnet, the door automatically closes, sliding on the inclined guide by gravity
Minimum dimensions 750x500
Maximum dimensions 6000x6000
Weight 50 kg/sqm
- POWER SUPPLY
An electric feeding is not necessary because the door can be moved manually. Some accessories, if used, ask for the relevant feeding, e.g. the electromagnets that keep the door open and leave it to close in case of alarm.
- STANDARD SAFETY DEVICES
Closing speed controller in case of fire alarm: it avoids excessive speed.
These doors must be equipped with this safety system.
End-of-run amortizer, compulsory for the side sliding fire doors.
Electromagnet for keeping open the door, until the current is cut off.
EM/S1 up to 12 sqm, EM/S2 between 12 and 30 sqm.
Several configuration of the position of the counterweight are available.
Prefabricated beam available for the "in light" installation.
Night inside (or outside) padlock with pass-through cylinder
Pedestrian door without bottom step