Set with 2 horizontal multistage euro
Water lifting sets particularly suited for domestic use, and small civil, agricultural, or industrial systems. Their main features are utmost reliability, simple
operation, and the fact that no maintenance is required. The sets are supplied as standard with tanks and with air supply connector.
Water lifting sets particularly suited for domestic use, and small civil, agricultural, or industrial systems. The centrifugal multistage EUROINOX electric
pumps used have the characteristics o also working when water, gas, or small amounts of sand are present in the water. These pumps are invaluable
when drawing water from artesian wells and in case of suction difficulties. Their main features are utmost reliability, simple operation, and the fact that
no maintenance is required. The sets are supplied as standard with tanks and with air supply connector.
Operating range: from 1 to 14.5 m3/h.
Pumped liquid: clean, free of solids and abrasives, non viscous, non aggressive, non crystallised and chemically neutral, with properties similar to water.
Pumped liquid temperature range: from 0 °C to +35 °C for domestic use - +40 °C for other uses.
Maximum ambient temperature: +40°C.
Maximum operating pressure: PN10.
Special executions on request: contact our sales network.
Protection class: IP44.
IE2 motors as standard from 0,75 kW to 5,5 kW - IE3 ≥ 7,5 kW.
2 EURO multistage centrifugal electric pumps. Tropicalized galvanized sheet steel base complete with 4 rubber anti-vibration feet. Suction and delivery
manifolds in tropicalized galvanized steel. 2 membrane tanks. Ball valves with unions on the suction and delivery ports of each pump. Check valves on
the suction port of each pump. 1 1/4" air supply connection at the suction of each pump. 2 tropicalized galvanized cast iron female plugs for closing the
manifolds. Radial manometer with isolator valve. 1 pressure transmitter on the delivery manifold (pressure detection).
IP 55 protection class self-extinguishing, shock-resistant plastic electric control panel on the delivery manifold of the set. The control panel protects the
electric pumps and controls the sequence, keeping the system at a pressure value already preset at the factory. The average pressure value may be
changed using a trimmer found inside the control panel. The pump starting order is switched at each operating cycle.
2 EUROINOX multistage centrifugal electric