3D Viewer


Window fittings

Manufacturer INTERNORM Italia

I-tec Innovations Collection
The innovative locking is the first real revolution in hardware systems since introducing the turn/tilt hardware at the beginning of the 1970‘s. For many years Internorm has been using concealed hinges as standard. Additionally, Internorm is applying the same principle to the window frame – no visible hardware.
I-tec locking is currently used with the home pure UPVC & UPVC/aluminium windowKF 500 and is revolutionary in more than one aspect: No visible locking parts on the frame are necessary – instead of protruding locking pegs, integrated flaps ensure the safe locking of the sash. The connections of the locking flaps are carried out invisibly in the hollow chambers of the sash profile.

Related products

 - Air vent for windows I-TEC VENTILATION - INTERNORM Italia Air vent for windows Fresh air and energy saving are the main advantages of the directly integrated ventilation in the window. With I-tec ventilation the rooms are aired automatically, energy efficiently and according to the requirements.

Fresh air ensures well-being, good sleep, high concentration and high performance. Even allergy sufferers can breathe again – the optional fitting of filters prevents fine dusts and flower pollen from entering. Through the regulated I-tec ventilation also mould formation is prevented.

Energy saving
Uncontrolled quick maximum air exchange or permanent airing can lead to high energy losses. The I-tec ventilator is equipped with an integrated heat exchanger with high efficiency. Energy losses are reduced to a minimum through the achieved 86 % heat recovery.

The I-tec ventilator is completely integrated into the new home pure window systemKF 500. On the outside and inside of the window only narrow ventilation grids are visible. Contrary to conventional ventilation systems, there is neither interference with the interior or exterior architecture, nor high energy losses resulting from uncontrolled quick maximum air exchange or permanent airing. Fitting the ventilator is carried out in the same process as installing the window.

Windows with integrated I-tec  ventilation supply the rooms permanently with fresh, clean air. At the same time damp and used air, unpleasant smells and pollutants are automatically exchanged for fresh air. The control element is fitted directly on the window, thus enabling convenient operation of the ventilator.

The I-tec ventilation system also increases security as the window remains closed for the air exchange and therefore, the burglary protection remains intact. When leaving the house there is no uncertainty if the windows were closed after airing.
 - Integrated venetian blind I-TEC INTEGRATED SHADING - INTERNORM Italia Integrated venetian blind The energy which the window requires and uses, should be produced by the window itself. The first product which follows this principle is the motor driven blind of the window with integrated blinds.

Power self-sufficient photovoltaic blind
All Internorm window systems with integrated blinds can be fitted with motor driven shading without an external power source. The energy is gained directly at the window via a photovoltaic module which is integrated into the blind cover and therefore, provides self-sufficient power for the electric motor. It is saved in a battery and is available when required. Permanent charging of the battery takes place already withdiffuse day light.
 - Window fittings FIX-O-ROUND - INTERNORM Italia Window fittings
 - Home automation system for video surveillance I-TEC SMARTWINDOW - INTERNORM Italia Home automation system for video surveillance The I-tec SmartWindow is easy to install and operate. All you need is simply a gateway which is connected to your existing WLAN router. The gateway is providing the interface between the respective components and the operating appliances.
You can download the I-tec SmartWindow app with its respective installation instructions for free in the App Store or Google Play. Components which are integrated into the building control, can simply be programmed, generate automatically the user interface in the app and can - at your discretion - via the tablet or smart phone (without additional software and PC) be named, and grouped into rooms and sorted. The user interface simply needs a few taps of the finger to move the blinds up and down, to adjust the light guidance according to your requirements, to regulate the ventilator's air volume or to open or close the fanlight.

Loading Extra News
Loading event fair
Loading product info request form