3D Viewer


8-fold binary output / 4-fold blind actuator

Manufacturer Ekinex® by SBS

The ekinex® EK-FE1-TP binary output / blind actuator allows to command 8 groups of loads or control 4 drives for motorised blinds independently. The device is fitted with membrane pushbuttons for manual command (even in the absence of bus power) and LED’s for status indication; a pushbutton allows to switch between automatic and manual operation modes. The device integrates a KNX bus communication module and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by the KNX bus and requires an additional 230 Vac power supply to operate.


Technical features

Power supply
• Voltage (loads) 230 Vac 50/60 Hz
• Voltage (electronics) 30 Vdc by KNX bus
• Current consumption from bus < 10 mA
• Power on bus < 240 mW
• Number: 8 or 4 independent channels (depending on device use)
• Nominal voltage (Un): 230 Vac
• Nominal current (In): 16 A (10 A)
• Max. switched power: 4000 VA
Main characteristics
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LED’s for status indication
• Pushbutton for switching operating mode (normal / programming)
• Connection to bus line with KNX terminal block
• Connection of outputs and 230 Vac power supply with screw terminals
• Overvoltage class III (according to EN 60664-1)
• Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
• Pollution degree 2 (according to IEC 60664-1)
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 315 g

Ekinex® by SBS Catalogues

8-fold binary output / 4-fold blind actuator EKINEX® EK-FE1-TP - Ekinex® by SBS

8-fold binary output / 4-fold blind actuator EKINEX® EK-FE1-TP - Ekinex® by SBS
Loading Extra News
Loading event fair
Loading product info request form