3D Viewer

EKINEX® EK-BK1-TP

DMX - KNX gateway

Manufacturer Ekinex® by SBS

The ekinex® DMX - KNX Gateway performs a protocol converson between a serial RS485 DMX and a KNX TP network. The device works as DMX master. The device integrates a KNX bus communication module and it is suitable for mounting on a 35 mm DIN rail; it requires an auxiliary power supply.

Dimensions

Technical features

Power supply
• Power supply: 8...24 Vac or 12...35 Vdc
• Absorption at 24 Vdc: 3,5 VA
KNX side
• KNX TP (Twisted Pair) communication port electrically isolated from power supply
• 1440-byte volatile support “KNX image” memory buffer
DMX side
• RS485 serial communication port, electrically isolated from power supply, 120 ohm termination resistance insertable by a 1-way microswitch
• DMX master communication
• Baud rate 250 kbaud
• Device addressing from 0 to 512
• 1-byte register writing on max 512 DMX devices
Configuration
• Ethernet communication port (IEEE 802.3), RJ45 connector, minimum cable category: 5E.
Main characteristics
• Plastic casing
• Connection to bus line with KNX terminal block
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 145 g

Ekinex® by SBS Catalogues

DMX - KNX gateway EKINEX® EK-BK1-TP - Ekinex® by SBS

DMX - KNX gateway EKINEX® EK-BK1-TP - Ekinex® by SBS
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags