PROPERTIES OF THE DRIED FILM
GOOD IMPACT RESISTANCE
GOOD WATER VAPOUR PERMEABILITY
As per specific colour card. The colour could vary slightly from one production batch to the next, so apply the finishing coat using the same batch.
It is ideal for decorating new structures or structures undergoing maintenance that have alkaline substrates treated with appropriate primer such as plasters with different compositions (cement, common lime, pre-mixed concrete and fibrocement). Using different ground colours and finishing colours, multicoloured effects are obtained; the best results are achieved when the work is carried out on skimmed surfaces.
The decorative effect is obtained by adding Aquilegia Colore to Aquilegia Base following the instructions provided on the colour card and slowly mixing by hand without breaking the particles of the white base. Then wet the hair glove with plenty of water and start distributing the product over the surface (it can also be spread with a brush or roller); after 10-15 minutes, crush the white particles with a soft spatula. Clean the tools with water. The texture effect depends on the manual skill of the applicator and on the quantity applied. For this reason the samples are only indicative. Before doing the actual job, run some tests on a demonstration panel.
Roller, Brush, Hair brush, Spatula.
Ready to use
7-8 sq.m/l per coat
Fully dry 24h
+5°C e +30°C