Water repellent water-based paint
Water paint, water-impermeable and moderately breathable, easy to apply, ideal for professional use as it is extremely compatible and has excellent adhesion and workability properties on a wide variety of substrates. Ideal for interiors, opaque, odourless, semi-covering, formulated with acrylic resins in water-based emulsion, and pale metallic pigments so as to create a changing and attractive play of light and coloured reflections; ideal for creating special decorations with an effect that is soft and textured to the touch. Its high quality guarantees maximum protection and excellent finishing results and produces a hard, elastic and tough film with high resistance to the penetration of stains and dirt. Easy to clean, even with commercial detergents. Being odourless, it is particularly suitable for poorly ventilated areas. It is formulated with high quality materials for a low environmental impact, reduced pollution and minimum emissions, so as to preserve the well-being and safety of its users and of those living in the environment. COLOURS: As per the samples. The range of colours can be extended using the Arreghini Colors 16 system. The colour could vary slightly from one production batch to the next; it is therefore important to finish the job with the same batch. USE: It is ideal as a finish for creating an impressive decorative effect in both in public and private surroundings, when special decorations are required. The substrates used must be skimmed and absolutely smooth. The texture effect depends on the manual skill of the applicator and on the quantity applied. For this reason the samples are only indicative. Before doing the actual job, run some tests using a demonstration panel. In order to obtain an even surface, work with the same tool and one applicator only in the finishing phase, and ensure continuous wet-on-wet covering of the entire wall without interruption. Tools should be washed with water immediately after use. TOOLS: Brush, Trowel, Steel spatula. THINNING: Up to 8% by weight with water, Up to 10% by volume with water. COVERAGE: 9-11 sq.m/l per coat. DRYING: Dry to recoat 5-8h; fully dry 24h. Optimum resistance to washing 5 days. APPLICATION TEMPERATURE: +5°C +30°C. STORAGE:+5°C e +30°C.