Wall primer formulated with water-dispersed synthetic resins, possessing a specific technology which generates a special film that ensures secure adhesion on different types of substrates as well as insulating and consolidating capacities. It guarantees even absorption and hence a uniform finish and excellent adhesion for subsequent coats. Thanks to the resin and special lamellar pigments contained in the product, Murisol guarantees high breathability, better colour resistance and fewer coats during the painting cycle. COLOURS:White. The range may be extended to the colours of the Tucano, Spazio 100 and Area 115 sample books. The colour could vary slightly from one production batch to the next; it is therefore important to finish the job with the same batch. The product may be coloured using the Arreghini Colors 16 systems (see Tintometric Systems catalogue). USE:Apply directly as a preventive coat on old paints, alkaline substrates such as plaster with different compositions (cement, common lime, pre-mixed, skim coat plaster for exterior insulation), concrete and fibrocement in one coat. Can be recoated with acrylic finishes, either elastomeric or siloxanic finishes such as K81, Murival, Trasil, K32 or Ecolora. TOOLS:Roller, Brush, Spray-gun. THINNING:Up to 12% by volume with Acquaragia (turpentine). COVERAGE:8-10 sq.m/l per coat. DRYING:Recoat after 5-8h; fully dry 24h. APPLICATION TEMPERATURE:+5°C +30°C. STORAGE:+5°C e +30°C.