Water repellent water-based paint
Water-dilutable paint, water-impermeable and moderately breathable, easy to apply, ideal for professional use as it is extremely compatible and has excellent adhesion properties, filling and covering powers on a wide variety of substrates. Its high quality guarantees maximum protection and resistance of the colour in outdoor environments with excellent finishing results. Thanks to its extreme fineness, it is ideal for interior applications where it produces a hard, elastic and tough film which is highly resistant to the penetration of stains and dirt. Easy to clean, even with commercial detergents (achieves maximum resistance 10 days after application). Thanks to its low opacity, it is characterised by a weak levellingcapacity. COLOURS:As per the samples. The range of colours can be extended using the Tintoretto sample books (for interiors), Tucano, Spazio 100 and Area 115 (for exteriors and interiors). The colour could vary slightly from one production batch to the next; it is therefore important to finish the job with the same batch. The product may be coloured using the Arreghini Colors 16 and Idrotema Professionale systems (see Tintometric Systems catalogue). USE:It is ideal for decorating and protecting, from atmospheric agents, new structures or structures undergoing maintenance and that have alkaline substrates such as plasters with different compositions (cement, common lime, pre-mixed, skim coat plaster for exterior insulation), concrete and fibrocement, in rural, marine or industrial environments. Strong colours may also be used. While being compatible with cement and reinforced concrete, it guarantees good but not specific protection. On exterior surfaces subject to biological pollutants, such as mould, seaweed and moss, add 1 litre of B25 Antimuffa Antialga or 350 ml of B25 Antialga Concentrato for every 14 litres of paint. TOOLS:Roller, Brush, Spray-gun.THINNING:Roller, Brush: 10 -15% by weight with water. Airless Spray-gun: 5-10% by weight with water. COVERAGE:10-12 sq.m/l (6-8 sq.m/kg) per coat, depending on the type of work process. DRYING:Dry to recoat 4-6h; Fully dry 18h. APPLICATION TEMPERATURE:+5°C +30°C. STORAGE:+5°C e +30°C.