3D Viewer

INFINITY 16i c.a.

Gas water heater

Manufacturer Rinnai Italia

Infinity 16 Internal forced flow open chamber (turbo) produces domestic hot water on demand for indoor  installation application with electronic temperature management and water flow control. The cover is in standard anti-corrosive enamelled galvanized steel and electronic control with temperature management and self-diagnosis function. 

Installation Indoor
Device type B₂₃
Available versions Natural gas, LPG, propane air
Input (kW) min 4,8 kW MAX 31 kW
Flowrate (l/min) min 2,4 l/min MAX 16 l/min (∆T=25°C)
Max settable temperature (°C) 75°C
Minimum activation pressure (bar) 0,1 bar
Operating water pressure (bar) min 0,9 bar MAX 10 bar
Flue system Ø 60 (max exhaust distance 7m + 3 curves). Male outlet. Please refer to the 'accessories' section
Maximum number of selectable commands 3
Current (V) 220/230 V
Power supply cord Dual non Polarized power cord/ min 0,5 mm Section
Electric consumption Normal 66 W Stand-by 6 W Antifrost 74 W
Provision for connection to recirculation kit RCD-XHF kit and REU-CUG1 kit
Provided with solar connection yes
Standard antifrost up to -20°C (STANDARD)

Related products

 - Gas water heater INFINITY 14i - Rinnai Italia Gas water heater Infinity 14 Internal sealed chamber produces domestic hot water on demand for indoor installation application with electronic temperature and water flow control.
DETAILS:
LIME SCALE DETECTOR_ the new sensor automatically detects possible lime scale deposits and signals this through a specific  "LC" flashing error code. The LC code is a useful prevention tool which  along with a new generation heat exchanger, is more resistant to the effects of lime scale.
ECOMODE_ with the «ecomode» setting Infinity self-regulates the water temperature to a maximum of 42°C and optimises the flow of hot water dispensed. The environmental impact is reduced, domestic comfort is not affected due to the fact that the temperature is maintained below 42°C.
STANDARD INTEGRATED AUTOMATIC RESET_  After power supply interruption, the Infinity 14i and 17i automatically turn on again  once power is returned.
PROVISION FOR INTEGRATION WITH SOLAR
Complete chassis redesign, the most essential and contemporary, with a new shade of white.

Installation Indoor
Device type C
Available versions Natural gas, LPG, propane air
Input (kW) min 5,90 kW MAX 22 kW
Flow rate (l/min) min 2 l/min MAX 11 l/min (16 l/min ∆T=15°C)
Max settable temperature (°C) 75
Minimum activation pressure (bar) 0,1
Nominal water pressure (bar) min 1,1 MAX 7 bar
Flue system Ø 60/100 coax - max exhaust distance 6m + 3 curves, separable Ø 80/80 Please refer to the 'accessories' section
Maximum number of selectable commands 3
Current (V) 220/230 V
Power supply cord Dual non Polarized power cord/ min 0.5 mm Section
Electric Consumption (W) Normal 68 W Stand-by 8 W Antifrost 60 W
Provision for connection to recirculation kit only RCD-XHF Kit
Provision for integration with solar yes
Antifrost up to -15°C standard
 - Gas water heater INFINITY 17i - Rinnai Italia Gas water heater Infinity 17 Internal produces domestic hot water on demand for indoor installation application with electronic temperature management and water flow control.
REU-1720FFU is the evolution of 16FUA. INNOVATION DETAILS:
+1 Litre of hydraulic flow rate in comparison to its predecessor.
LIME SCALE DETECTOR_ the new sensor automatically detects possible lime scale deposits and signals this through a specific  "LC" flashing error code. The LC code is a useful prevention tool which  along with a new generation heat exchanger, is more resistant to the effects of lime scale.
ECOMODE_ with the «ecomode» setting Infinity self-regulates the water temperature to a maximum of 42°C and optimises the flow of hot water dispensed. The environmental impact is reduced, domestic comfort is not affected due to the fact that the temperature is maintained below 42°C.
STANDARD INTEGRATED AUTOMATIC RESET_  After power supply interruption,  Infinity 11i and 17i automatically turn on again  once power is returned.
PROVISION FOR INTEGRATION WITH SOLAR
complete chassis redesign, the most essential and contemporary, in a new shade of white.

Installation Indoor
Device type C
Available versions Natural gas, LPG, propane air
Input (kW) min 3,80 kW MAX 32 kW
Flow rate (l/min) min 2 l/min MAX 17 l/min (20 l/min ∆T=15°C)
Max settable temperature (°C) 75
Minimum activation pressure (bar) 0,1
Nominal water pressure (bar) min 1,1 MAX 7 bar
Flue system Ø 60/100 coax - max exhaust distance 6m + 3 curves, separable Ø 80/80. Male outlet. Please refer to the 'accessories' section.
Maximum number of selectable commands 3
Current (V) 220/230 V
Power supply cord Dual non Polarized power cord/ min 0,5 mm Section
Electric consumption (W) Normal 68 W Stand-by 8 W Antifrost 60 W
Provision for connection to recirculation kit only RCD-XHF Kit
Provision for integration with solar yes
Antifrost up to-15°C standard

Videos

Gas water heater INFINITY 16i c.a. - Rinnai Italia

Gas water heater INFINITY 16i c.a. - Rinnai Italia
Rinnai
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags