Paint with mineral binders containing potassium silicate with drying times which enable rapid use of the rooms in which it is applied. Due to its chemical nature, it does not form a film but hardens due to a chemical reaction with the substrate and, given its high alkalinity, it has greater resistance to mould compared to ordinary paint for interiors. It is characterized by high water vapour permeability so as to guarantee the breathability required to ensure dry walls and avoid condensation in environments subjected to high concentrations of steam such as kitchens and bathrooms. Its high breathability makes it ideal as a finishing product for dehumidifying systems. Thanks to its high quality, a good compact and even finishing level is obtained, guaranteeing excellent filling properties and an even opaque finish even on large surfaces against the light; it provides a low dust retention film that is friction-resistant, easy to remove stains from with a damp sponge, to guarantee easy cleaning. COLOURS:White. The Arreghini Colors 16, Idrotema Professionale and Acquacolor colour systems may be used for painting in pastel shades. The colour could vary slightly from one production batch to the next; it is therefore important to finish the job with the same batch. Mineral products react chemically with the substrate and therefore on plasters of different types and compositions, there may be variations in colours even with the same batch; prepare the undercoat well. USE:It is ideal for decorating and protecting new structures or structures undergoing maintenance that have a variety of substrates such as plasters with different compositions (cement, common lime, premixed), concrete and fibrocement, plasterboard, filler skims and old silicate or lime-based paint, – even with pastel colours – with excellent aesthetic results and at reasonable costs. For spray applications, ensure that the substrate is dust-free and avoid excessive atomization of the product by regulating the pressure, nozzle and thinning so as to ensure that the paint sprayed sufficiently wets the surface. On substrates subject to biological pollution due to mould, add 2 litres of anti-mould agent Antimuffa A10 for every 14 kg of paint. Since the product hardens by a chemical reaction with the substrate, it is important to cover the surfaces that do not require painting (glass and marble) and to remove any colour stains immediately. Clean tools with water. TOOLS:Roller, Brush, Spray-gun. THINNING:Roller, Brush: 10-20% by volume with water.Airless Spray-gun: 5-10% by volume with water. COVERAGE:8-10 sq.m/l per coat. DRYING:Dry to recoat 4-6h; Fully dry 18h. APPLICATION TEMPERATURE:+5°C +30°C. STORAGE:+5°C e +30°C.