Assembly adhesive for fast and high-strength adhesive bonding for indoor and outdoor applications
Resistant to weather, ageing and UV rays
Skin forms after approx. one minute
Broad adhesive range
Can be used on a wide variety of substrates
Notice: Not suitable for PS, PE, PP, Styrofoam. Min. one absorbent surface
Cannot be used on EPDM
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
For quick and permanent securing of baseboards, panels, floor elements, wall cladding, window bows, door sills, wooden door frame linings, decorative profiles etc.
Broad adhesive spectrum on surfaces such as wood and wood fibreboards, steel, aluminium, PVC, gypsum, gypsum plasterboard, masonry and concrete.
Also suitable for slightly damp surfaces.
Chemical basis Styrene-butadiene rubber
Colour Light beige
Min. skin-formation time 1 min
Full curing speed 3 mm/d
Min./max. final strength 4-5 d
Min./max. temperature resistance -40 to 100 °C
Min./max. processing temperature 5 to 35 °C
Shelf life from production 12 Month