3D Viewer

PUNKA

Galvanized steel Bench

Manufacturer LAB23

design by
The PUNKA seat is made of galvanised and polyester powder coated steel EN10111DD1, T. 40/10. It consists of two elements welded through a continuous wire welding and then polished, making the welding invisible. The first sheet plate is bent on 4 points with angles of 90 degrees at 130 mm and 450 mm, while the second sheet plate is bent on the lower part of the first one and it has two folds of 21 degrees on the longer sides. The ground fixing is possible thanks to four holes with a 10 mm diameter

Dimensions

Max dimensions:

Height: 450 mm
Length: 1200/1800 mm
Width: 500 mm
Width of the feet: 130 mm

Related products

 - Bench with Integrated Planter PUNKA C F - LAB23 Bench with Integrated Planter The PUNKA C F seat is made of galvanised and polyester powder coated steel EN10111DD1, T. 40/10. It consists of four elements: the first sheet plate is bent on 4 points with an angle of 90 degrees at 130 mm and 450 mm, while the second sheet plate is bent on the lower part of the first one and it has two folds of 21 degrees on the longer sides, thus creating the seat. The third element is placed on the seat through a foot 300 mm high, whilst through another foot, H 750 mm, it is fixed on the ground. Furthermore, the third element contains a bin made of galvanised and polyester powder coated steel EN10346DX51D+Z or brushed stainless steel AISI 304, T. 10/10, dimensions 300x300xH 690 mm. On the upper part with correspondence to a squared hole 250x250 mm, 2 M4 bolts are fixed to a frame in galvanised steel EN10346DX51D+Z, T. 10/10 and dimensions 250x250xH 20 mm. The fourth element is placed on the bin holder through a foot 300 mm high, whilst through another foot, H 1425 mm, it is fixed on the ground. Furthermore, the fourth element contains a planter made of galvanised and polyester powder coated steel EN10346DX51D+Z or brushed stainless steel AISI 304, T. 10/10, dimensions 300x300xh 1420 mm. On the upper part with correspondence to a squared hole 250x250mm, 2 M4 bolts are fixed to a frame in galvanised steel EN10346DX51D+Z, T. 10/10 and dimensions 250x250xH 20 mm. Ground fixing is possible thanks to eight holes with a 10 mm diameter.
 - Bench with Integrated Planter PUNKA C - LAB23 Bench with Integrated Planter The PUNKA C seat is made of galvanised and polyester powder coated steel EN10111DD1, T. 40/10. It consists of three elements: two of them are welded through a continuous wire welding and then polished, making the welding invisible. The first sheet plate is bent on 4 points with an angle of 90 degrees at 130 mm and 450 mm, while the second sheet plate is bent on the lower part of the first one and it has two folds of 21 degrees on the longer sides, thus creating the seat. The third element is placed on the seat through a foot 300 mm high, whilst though another foot, H 750 mm, it is fixed on the ground. Furthermore, the third element contains a bin made of galvanised and polyester powder coated steel EN10346DX51D+Z or brushed stainless steel AISI 304, T. 10/10, dimensions 300x300xh 690 mm. On the upper part with correspondence to a squared hole 250x250 mm, 2 bolts M4 are fixed to a frame in galvanised steel EN10346DX51D+Z, T. 10/10 and dimensions 250x250x H 20 mm. Ground fixing is possible thanks to six holes with a 10 mm Ø.

LAB23 Catalogues

Galvanized steel Bench PUNKA - LAB23

Galvanized steel Bench PUNKA - LAB23
Galvanized steel Bench PUNKA - LAB23

Galvanized steel Bench PUNKA - LAB23
Galvanized steel Bench PUNKA - LAB23

Galvanized steel Bench PUNKA - LAB23
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags