3D Viewer

MGO FILLER DRY

Fixative for the reinforcement

Manufacturer ITP

MGO BOARD® Collection
MGO Filler Dry may be used as joint filler, finish and fixative for the reinforcement mat to prevent damage due to structural settlement or thermal expansion. The filler has good waterproofing properties and high mechanical strength, shock and filler has good waterproofing properties and high mechanical strength, shock and abrasion resistance. Thanks to its high binding properties, MGO Filler Dry is highly elastic and characterised by low water solubility. The product adapts to any type salt; to mountain areas subject to continuous temperature fluctuations and highly polluted industrial areas.

Further details

MGO FILLER DRY
DESCRIPTION
MGO Filler Dry may be used as joint filler, finish and fixative for the reinforcement mat to prevent damage due to structural settlement or thermal expansion. The filler has good waterproofing properties and high mechanical strength, shock and filler has good waterproofing properties and high mechanical strength, shock and abrasion resistance. Thanks to its high binding properties, MGO Filler Dry is highly elastic and characterised by low water solubility. The product adapts to any type salt; to mountain areas subject to continuous temperature fluctuations and highly polluted industrial areas.
 
APPLICATION TEMPERATURE
Between +5°C and +40°C; Relative Humidity <80%.
 
PREPARATION OF THE MIXTURE
Mix MGO Filler Dry with 7 litres of clean water per 25 kg bag.
Mix with a low speed drill (150-300 rpm) for at least three minutes to a smooth Mix with a low speed drill (150-300 rpm) for at least three minutes to a smooth and plastic consistency. Wait for 10 minutes then mix again to ensure that. 
 
PREPARING THE DECK
Ensure that the deck is perfectly level and free from dust or other impurities.
 
CURING AND POT-LIFE
Use the mixture within 2 hours from mixing (at 20° C and RH 65%).
 
COVERAGE
Approx. 1.2 Kg/sq.m. per mm of thickness
 
COMPOSITION
High-adhesion acrylic, select micro fillers, extra-pure silicon aggregates, High-adhesion acrylic, select micro fillers, extra-pure silicon aggregates, hydromethylcellulose.
 
PACKAGING
25 Kg bags.
 
STORAGE
Store well sealed bags in an area protected from weather agents at a temperature above +5° C and below 40° C, protect from frost; do not expose to direct sunlight, above +5° C and below 40° C, protect from frost; do not expose to direct sunlight, life: 6 months
 

ITP Catalogues

Fixative for the reinforcement MGO FILLER DRY - ITP

Fixative for the reinforcement MGO FILLER DRY - ITP
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags