Hydraulic worm plastering machine for ready-mixed and traditional plasters
T20X is a state of the art plastering machine equipped with worm pump, lifting mixer and closed-loop hydraulic circuit for mixing, pumping, spraying and injecting common, ready-mixed, insulating and special mortars.
- Traditional site mixes and premixed dry mortars
- Insulating and fireproofing mortars
- Thixotropic mortars
- Monocoat mortars
- Concrete repair
- Casting restoration
- Self-levelling floor screeds
- New design, large lifting mixer with low filling height, great capacity hopper, support foot and special double layer hood
- Powerful and long-lasting 3-cylinder diesel engine
- New sound insulation for extremely quiet operations
- Electromechanical, user-friendly control panel and protection flap
- Hydraulic circuit with variable displacement pump that guarantees high performance and fuel savings
- Easy exchangeable pump groups (2L6, T25, 60.12 and 2L7) depending on the job to be performed
Plastering machine and conveying machine for mortars
MINI AVANT - Plastering machine and conveying machine for common and special mortars. Unique, easy to handle and powerful, the low loading height and special profile of the hopper, make it very practical and easy to use. It can be fed by the site mixer or can be used with ready-mixed mortar from a continuous mixer, to guarantee excellent performance and economical running costs. Flanked to a concrete mixer, a pan mixer or a continuous automatic mixer, it allows to transfer common lime and/or cement-based mortars, concrete-based ready-mixed mortars, light mortars for heat and acoustic insulation, fireproof mortars and special concrete mortars to the point of use. These can be laid to build walls or applied to indoor/outdoor walls and ceilings by spraying using a suitably gun, both for common thick and thin-layer finishings, for structural recovery and renovations.It can also be well used to pump self-levelling screed, the injection of cement slurry at controlled pressure and the filling of joints and leaks on facing masonry (VARIO version). Available in three versions: SINGLE-PHASE, THREE-PHASE and VARIO. In particular, the VARIO version guarantees high operational flexibility thanks to a special electronic device that allows to vary the flow rate from 2 to 30 litres per minute, according to the type of materials to be pumped.
Screw pump plastering machine
POLI T - Screw pump plastering machine for common and special mortars powered by electric three-phase motor. For mixing, pumping, spraying and injecting traditional, ready-mixed, insulating, cement and special mortars and self-levelling screeds. Equipped with a worm gear (or screw) pump, POLI T is extremely flexible and efficient and can be used for all kinds of jobs by building professionals: builders, plasterers, decorators, floor layers and specialists. High performance, high torque, minimum installed power, for a machine that can be used for any specific job. The low loading height makes it very simple and easy to use. POLI T: the expression of versatility. EV - Variable displacement - EV for ready-mixed plaster or traditional mortar; EV/MP with mixer for ready-mixed plaster or traditional mortar. 2V - 2 speeds - 2V for ready-mixed plaster or traditional mortar; 2V/MP with mixer for ready-mixed plaster or traditional mortar.
PRO H DM
PRO H DM - Plastering machine with worm-gear pump and hydraulic functioning for common and special mortars. State-of-the-art plastering machine for mixing, pumping, spraying and injecting ready-mixed and traditional mortars, insulations, special concretes and self-levelling screeds.Result of the most developed TURBOSOL research it is equipped with a worm-gear pump with hydraulic circuit functioning and tilting mixing machine. PRO H DM has a diesel engine (electric version on request) and tilting mixing machine.
Available in two versions: Traditional mortars; Ready-mixed plasters.
Worm-gear pump for spraying finishings
T7 - Worm-gear pump for spraying finishings, injections and filling joints and leaks. Compact, versatile and easy to handle. A multi-functional, simple to use machine. It has a stainless steel hopper and works with granulometry between 0 and 5 mm, for spraying any sort of coating. Ideal for spreading waterproofing and protective sleeves. It is also used for pumping cement slurries, mortars and for injection at controlled pressure. The innovator in the decorating field. With the coupling of special accessories, it allows to inject cement slurry at controlled pressure, to fill joints and leaks.
Single piston pump for spraying mortars and grouts
UNI 30 - Single piston pump for spraying mortars and grouts. Compact, versatile and easy to handle. A multi-functional, simple to use machine. It has a stainless steel hopper and works with granulometry between 0 and 5 mm, for spraying any sort of coating. Ideal for spreading waterproofing and protective sleeves. It is also used for pumping cement slurries, mortars and for injection at controlled pressure. The innovator in the decorating field. It is particularly suitable for many applications, even heavy duty, which go from spraying at pumping, at the spritz beton and at controlled pressure injection of special mixtures. Available with electric (E) or diesel (D) motorisations in two versions: S standard; MF with compulsory mixing machine.
TURBOSOL PRODUZIONE Catalogues