3D Viewer

CRACK MONITORING GAUGE DN250-10

Instrumentation for monitoring, testing and measuring system

Manufacturer NOVATEST

The Crack Monitoring Gauge DN250-10 produced by NOVATEST, finds its ideal application in the operations of monitoring holes or evidence of deformation with the use of flat jacks.
The instrument is composed of a comparator (analog or digital) with a level of precision of a hundredth or thousandth of a millimeter (0.01 / 0,001), mounted on a metal bar where a conical headed pin is fixed to a end of the bar.
Another similar pin is mounted on a slider on the opposite end allowing to have longitudinal excursions of a few millimeters (± 5 mm).
The movement of the pin acts on the comparator, which in turn shows the displacements in its quadrant.
The Crack Monitoring Gauge DN250-10 has been designed to resist changes in temperature and developed with the mechanical characteristics and dimensional tolerances which exclude the possibility of movements that are not those permitted guaranteeing a constant repeatability of measurements.
Through the positioning template, you can plot the points on the structure of the drill holes and the subsequent insertion of bases for measuring or strongholds (fixed to the structure).
Using the template of "calibration" can then verify the correct resetting of the comparator before the test.

Further details

The instrument consists of a metal bar to the ends of which are mounted two heads / terminal pins with conical points, one is fixed while the other is free to swing on a slider system housed inside the bar.
Readings of the displacements are then displayed in a digital comparator, or hundredths micron resolution (0.01 mm / 0.001 mm).
Completing the instrument:
• measuring position template
• calibrating template
• box of mounting points
The use of crack monitoring gauge allows accurate levels of approximation (0.001 mm thousandth of a millimeter) as is required in situations of distress or during the probes with flat jacks on masonry.
Standard accessories of DN250-10:
• Measuring position template
• Calibrating template
• No.2 box of 25pcs mounting points: diam. 6/8 mm L 30/50 mm
• User manual
• Padded case

NOVATEST Catalogues

Videos

Web links

Instrumentation for monitoring, testing and measuring system CRACK MONITORING GAUGE DN250-10 - NOVATEST

Instrumentation for monitoring, testing and measuring system CRACK MONITORING GAUGE DN250-10 - NOVATEST
MyNDT - Come iniziare una nuova acquisizione tablet/cellulare
MyNDT - Rebar Locator
MyNDT - Test Hammer Survey
MyNDT - Ultrasonic Test
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags