Stain remover spray
FILANOSPOT Stain remover
What It’s For
Removes greasy and oily stains from terracotta, quarry tiles, natural stone, granite, agglomerates, tumbled marble, stones or cobblestones, cement.
Extremely practical with its easy-touse spray.
Very effective on external terracotta which is untreated or treated with non-filming products. Leaves no traces if the stain is fresh.
Also perfect on quarry tiles and natural stone.
Cleans where normal sprays do not reach.
Guarantees excellent performance even on untreated surfaces.
Materials to be treated
Stone and agglomerates
250 ml cans in boxes of 12.
HOW TO USE IT
No dilution required: ready to use.
1.Spray from a distance of 15 cm holding the can at an angle of about 45°.
2.Leave to dry for a few minutes. It absorbs grease deposits and then dries, leaving a thin layer of white powder on the floor.
3.Remove using a brush.
4.Wipe over with a damp cloth.
If traces remain, repeat the operation.
When used on wax-treated floors, you need to remove the wax from the whole tile after removing the stain and then restore the wax coating
• Keep out of reach of children.
• Do not disperse into the environment after use.
Storage temperature: from 0° to 30°C
The product should be applied to materials with temperature between 5° and 30° C.
30% hydrocarbon, Perfume, linalool. Propellant: Butane, Propane, Isobutane.
Fila Industria Chimica Catalogues