HOW TO USE IT
No dilution required: ready to use.
Indoor surfaces in terracotta and untreated stone:
On a clean and dry surface, apply one coat of FilaW68, evenly, using a paintbrush or fleece pad, also soaking the joints well. Wait 4 hours, then apply a coat of FILAJET. Wait at least an hour, then apply a coat of the specific finishing wax for the effect desired (FILAMATT: natural; FILASATIN: satin; FILACLASSIC and FILALONGLIFE: glossy). Internal surfaces in terracotta and polished stone.
On a clean and dry surface, apply one coat of FILAW68, evenly, using a paintbrush or fleece pad, also soaking the joints well. Wait 4 hours and then, apply a coat of FILAJET and following with the deisired wax (FILAMTT: natural; FILASATIN: satin; FILACLASSIC and FILALONGLIFE: glossy).
Outdoor surfaces in terracotta, stone and concrete:
On a clean surface, apply 2 coats of FILAW68 evenly, using a paintbrush or fleece pad, also soaking the joints well.
Maintenance: diluted solution of FILACLEANER
Carry out a patch test on a small surface area to check for any changes in colour.
Do not apply the product externally if rain is forecast.
• Keep out of reach of children.
• Do not disperse into the environment after use.
• Protect can from frost. Store at room temperature.
Outdoor flooring must be properly laid before being treated and must satisfy all the specific requirements, including: adequate sloping, properly executed expansion joints, perfect isolation from the underlying ground, proven compatibility with sub-zero temperatures. It does not protect marble and limestone from acid.
Storage temperature: from 5° to 30° C
The product must be applied to material with a temperature of between 10° and 30°C.
Water suspension of organic resins.