3D Viewer

CUPOLEX

Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab

Manufacturer PONTAROLO ENGINEERING

Aerated flooring system element with a dome shape,mutually and fastly connected will compose a selfbearingstructure suitable to admit the concrete castingfor the construction of the foundation platform. The Cupolex system creates a hollow space for aventilation under the floor. The recycle of air, that isformed below the slab, convoys the humidity and anyradon gas, outside the buildings. With Cupolex the living is healthier and brings benefitsfor the duration of the building. Cupolex is an ideal product to be used for renovationinstead of using gravel material for raising the deck.

Further details

CUPOLEX
Good reasons for using CUPOLEX
• Waterproof against moisture.
• Ventilation in all directions.
• Healthiness in the living.
• Conveys humidity moisture and radon gas outside the building.
• Economical and easy installation.
• Top finishing possible with carpet, parquet floors and tiles.
• Very high bearing capacity, even when use in industrial applications.
• Air heating and conditioning to floor-level.
• Provides space for running services (ductwork, cables, etc.).
• Hollow spaces for inspections.
• Adapts any types of plan.
• High and safety, supports walking on product before concrete placement.
• Dome made of recycled plastic.
Concrete consumption (m³/m²) top of the dome
Common dimensions
The following table contains the dimensions of the required metal reinforcement for the most common applications with: soil
Winkler constant of 1 kg/cm³ and 10 cm of lean concrete.
Structural Resistance
Slabs structed with Cupolex have been tested in collaboration with the CNR and the University of Padova and the results implemented in the code of calculation “Easy Cupolex”. Please enquire it to our technical office, free of charge.
Walking Support
Cupolex has been tested to support a load of 150 daN applied on plate of 5x5 cm set on the top of the element.

Related products

 - Formwork and dome for hollow core slab BETON STOP - PONTAROLO ENGINEERING Formwork and dome for hollow core slab Recycled polypropylene element suitable for closing the side openings of CUPOLEX® during the simultaneous casting of the foundation and the slab.
Owing to its special shape it compensates the required dimensions different from those obtained by using CUPOLEX® module 56, with no need to cut the CUPOLEX® units. In that way CUPOLEX® will be suitable for all project dimensions.
 - Formwork and dome for hollow core slab CUPOLEX RIALTO - PONTAROLO ENGINEERING Formwork and dome for hollow core slab Aerated flooring system for heights up to 250 cm constituted by Cupolex Rialto dome, pipes and base that quickly connected the one to the other compose a structure suitable for receiving poured concrete. Cupolex Rialto is a forming system for providing an easy, efficient and fast solution for constructing an aerated floor with heights from 50 cm to 250 cm. This forming system comprises of Cupolex Rialto domes, pipes and bases that quickly interlock and connect to each other composing a self bearing structure ready for the placement of a concrete slab. The elevated Cupolex Rialto slab supported by thematrix of columns, formed by the pipes, allows thesystem for high load-bearing capacities and the elevated Cupolex Rialto structure creates a hollow space for a ventilation under the floor. The recycle ofair, that is formed below the slab, convoys the humidity and any radon gas outside the buildings. With Cupolex Rialto the living is healthier and brings benefits for the duration of the building. Cupolex Rialto is an ideal product to be used for renovation instead of using gravel material for raising the deck.
 - Rainwater recovery system CUPOLEX RIALTO Drainage systems - PONTAROLO ENGINEERING Rainwater recovery system CUPOLEX RIALTO - Tank for drainage system.
 - Plastic dome and module for ventilated hollow floor CUPOLEX WINDI - PONTAROLO ENGINEERING Plastic dome and module for ventilated hollow floor Element for the creation of aerated floor system with a particular shape which allows the concrete to be completely isolated from damp or water for the sub-floor. Cupolex Windi is an aerated floor system element available in two sizes H 5 and H 10 cm. It is an hydraulic holding for the whole height of the element. Cupolex Windi is also ideal for the thermal isolation of balconies and for the improvements of wine cellars and basements.

PONTAROLO ENGINEERING Catalogues

BIM/CAD

Videos

Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING

Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING
Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING

Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING
Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING

Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING
Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING

Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING
Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING

Plastic dome and module for ventilated hollow floor / Formwork and dome for hollow core slab CUPOLEX - PONTAROLO ENGINEERING

Progetto Strutturale di una villetta bifamiliare

Calcestruzzo Armato

Borgetto

/

Italy

/

2016

R.s.a

Residenza Sanitaria Assistita

Fisciano

/

Italy

/

2012

Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags