PROPERTIES OF THE DRY FILM
GOOD DISTRIBUTION OF STEAM
GOOD IMPACT RESISTANCE
LOW RESISTANCE TO DIRT
GOOD RESISTANCE TO WASH (AFTER 5 DAYS)
As per sample. The shade between one batch and another may be slightly different; it is therefore necessary to finish the job with the same batch.
It is indicated, as a finish to create a decorative effect and is especially valuable in public or private areas where special decorations or "veiling” effects are desired.
Using different tools and different background colors you will get different color effects. The best results are obtained with a white or a background with a lighter tone compared to the finishing coat. If you want to increase the color effect you can proceed with a second application of Kalahari. The effect “texture” depends on the dexterity of the applicator and the amount applied and therefore the sample is indicative. Before commencing the work carry out practical tests on a representative panel.
To obtain a homogeneous surface always work with the same tool and work with a single operator for the finishing coat, and make sure to continuously work on wet surfaces on the entire wall without interruption. Tools should be cleaned with water immediately after use.
Roller, brush, sponge trowel, gloves.
0-35% with water by volume
10-12 m2/l per layer
An over coat may be applied after 5-8h; Completely dry in 18 h.