PROPERTIES OF DRIED FILM
WEATHER RESISTANCE - GOOD
IMPACT RESTISTANCE- GOOD
CORROSION RESISTANCE - EXCELLENT
ADHENSION ON OLD PAINT - GOOD
COVERAGE ON THE EDGES - VERY GOOD
As per sample.
Between one product and another, the shades may be slightly different; it is therefore necessary to finish the job with the same production.
It is suitable for decoration and protection from atmospheric agents in the rural atmospheres, marine areas and industrial (even with intense colors) new products or those undergoing maintenance for furnishings such as furniture, windows, railings, lattice-based iron supports appropriately pretreated with galvanized iron, aluminum, alloys, plastic, without having to apply preventive backgrounds directly on the artifact.
The recommended thickness for good protection has to be determined depending on the aggressiveness of the environment and application support has to always be performed on perfectly clean surface. Film thickness per layer, and adverse environmental conditions slow down the drying and hardening. Make sure the previous coat is fully dried before overcoat and in any case within 72 hours to ensure good adhesion of subsequent layers otherwise sandpaper between layers.
Tools should be cleaned with Acetone or Turpentine Wash immediately after use.
The sand paper dust and / or spray paint and dry residues of the paint should not be accumulated because they cause spontaneous combustion.
The actual temperature during application must be at least 3 ° C above the dew point and relative humidity should not be> 65%.
Spray, Brush, Roller.
Up to 7% by volume (5% by weight) with Acquaragia
6-7 m2 / l (4-5 m2 per kg) to obtain a thickness of 70 μm when dry
Upon touch 6h; overcoat 18-24h, 24h completely dry
+5°C / +30°C