PROPERTIES OF DRY FILM
WEATHERING RESISTANCE (gray) - EXCELLENT
IMPACT RESISTANCE - GOOD
RESISTANCE TO BENDING - EXCELLENT
ADHESION ON DIFFERENT KINDS OF SURFACES- EXCELLENT
ELASTICITY - EXCELLENT
As per sample. Between one product and another, the shades may be slightly different; it is therefore necessary to finish the job with the same production.
MODE OF USE
It is suitable for decoration and protection from atmospheric agents in the rural atmospheres, marine areas and industrial products that are new or undergoing maintenance for furnishings such as furniture, windows, railings, lattice-based media appropriately pretreated with iron, galvanized iron, aluminum, alloys, plastic, without having to apply preventive backgrounds directly on the artifact.
The recommended thickness for good protection has to be determined depending on the aggressiveness of the environment and application has to always be performed on perfectly clean surfaces. In cases in which the product has been stored at low temperatures it is advisable to take him to at least +15 ° C before application.
To encourage an even distribution in roller applications apply the product in the right quantities (avoid too thin layers).
During application and drying time, it is essential that the temperature exceeds +15 ° C and the humidity is below 65%; in internal environments it is also important that the environment is aerated/ventilated to encourage evaporation of water. Remember that paint that is applied thicker than that indicated or in different environmental conditions may cause the lengthening of the drying time, as does slow evaporation of water.
The preheating of the product to 30 ° C, gave good results by improving the coverage of the edges and avoided dripping of the paint.
The product is suitable for forced tunnel drying and hot air drying at +35 ° / +50 ° C.
The actual temperature during application must be at least 3 ° C above the dew point and relative humidity should not be> 65%.
Spray, Brush, Roller.
5-10% water by weight, 10-15% water by volume
7-8 m2 / l (4.5-5.5 m2 per kg) to obtain a thickness of 70 μm when dry
+5°C to +30°C