3D Viewer

UNIFERCAP MEDIO

Enamel

Manufacturer CAP ARREGHINI

Lasurcap Line
Enamel suitable for coating systems of various artifacts, waterproof, easy to apply, ideal for professional use as it has high compatibility and adhesion, filling capacity and coverage of different types of background. It ensures a finishing characterized by high uniformity, mechanical strength and formidable against weathering which is essential for the duration of the applications, and useful in time to preserve the artifact. It delivers high-quality aesthetic and technical solutions for the diverse needs of painting with an excellent level of finish and maximum protection and durability of color outdoors even in situations of high exposure to severe conditions. The characteristics of suitable elasticity, wear and tear resistance generate a film that is stable, beautiful and resistant to the stresses due to the natural variation in size of the support under varying climatic conditions. It is formulated with micaceous iron oxide, which is stable to light and acts as a light barrier, modified alkyd synthetic resin in solvent phase, which provides superior protection in bright outdoor weathering and exposure to sunlight. It is adapted for painting methods of both internal and external artifacts. The properties of adequate distension and low tendency to drip allows it to be applied with hand tools or mechanical applications that provide a finish characterized by high homogeneity aesthetic, uniform thickness and adequate coverage of the edges.

Technical features

Technical information
PROPERTIES OF DRIED FILM
WEATHER RESISTANCE - GOOD
IMPACT RESISTANCE - GOOD
CORROSION RESISTANCE - EXCELLENT
MEMBERSHIP ON OLD PAINT - GOOD
COVERAGE ON THE EDGES - VERY GOOD

COLOURS
As per sample.
Between one product and another, the shades may be slightly different; it is therefore necessary to finish the job with the same production.

MODE OF USE
It is suitable for decoration and protection from atmospheric agents in the rural atmospheres, marine areas and industrial (even with intense colors) new products or those undergoing maintenance for furnishings such as furniture, windows, railings, lattice-based iron supports appropriately pretreated.
The recommended thickness for good protection has to be determined depending on the aggressiveness of the environment and application support has to always be performed on perfectly clean surface. Film thickness per layer, and adverse environmental conditions slow down the drying and hardening. Make sure the previous coat is fully dried before overcoat and in any case within 72 hours to ensure good adhesion of subsequent layers otherwise sandpaper between layers.
Tools should be cleaned with Acetone or Turpentine Wash immediately after use.
The sand paper dust and / or spray paint and dry residues of the paint should not be accumulated because they cause spontaneous combustion.
The actual temperature during application must be at least 3 ° C above the dew point and relative humidity should not be> 65%.

TOOLS

Brush, Spray, Roller.

DILUTION
Up to 16% by volume (10% by weight) with Acquaragia

EFFICIENCY
8-11 m2 / l (5-7 m2 per kg) to obtain a thickness of 70-50 μm

DRYING
Overcoat 18-24h; completely dry in 24 h

APPLICATION TEMPERATURE
+5°C/+30°C

STORAGE
+5°C/+30°C
Enamel UNIFERCAP MEDIO - CAP ARREGHINI

Enamel UNIFERCAP MEDIO - CAP ARREGHINI
Enamel UNIFERCAP MEDIO - CAP ARREGHINI

Enamel UNIFERCAP MEDIO - CAP ARREGHINI
Enamel UNIFERCAP MEDIO - CAP ARREGHINI

Enamel UNIFERCAP MEDIO - CAP ARREGHINI
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags