PROPERTIES OF THE DRY FILM
EXCELLENT RESISTANCE TO ATMOSPHERIC AGENTS
GOOD RESISTANCE TO CORROSION
GOOD IMPACT RESISTANCE
As according to the color chart and the RAL sample.
Between one batch and the other, the color may be slightly different; it is therefore necessary to finish the job with the same batch. Product tinted with Arreghini Colors 16 systems (see Tintometric Systems catalog).
It is suitable for decoration and protection from atmospheric agents (even with intense shades) for new products or products undergoing maintenance, such as industrial machinery, casings, railings, barges, tanks, vessels made of ferrous metal surfaces, galvanized steel, aluminum, alloys, plastics, wood of different species which have been appropriately pretreated, in rural, marine and industrial atmospheres.
The recommended thickness for a good protection is to be determined depending on the aggressiveness of the environment and the application should always be performed on a perfectly clean surface. Higher film thickness per layer and unfavorable environmental conditions slow down the drying and in depth curing. To avoid delays in drying times the wet film thickness must not exceed 70 microns per coat. Make sure the previous coat is fully dried before over coating. Apply the second layer within 72 hours to ensure a good adhesion between layers otherwise sandblast between each layer.
Tools should be cleaned with Acqauragia immediately after use.
The sand dust and / or spray paint and dry residues should not be accumulated because they cause spontaneous combustion.
The actual temperature during application must be at least 3 ° C above the dew point and the relative air humidity should not be> 65%.
Ready to use.
12-14 m2 / s per layer
Dry to Touch: 4-6h