Vertically sliding industrial door
The vertically opening rapid door SMART POCKET is the solution for dividing ambiences in industrial and commercial places and for external closures. The esthetical impact of the SMART POCKET is highly positive: the steel frame is galvanized and lacquered RAL 9002, perfectly adapting with the available colours of the coat. It has been the imperative of the door project, realized by brushes on both sides of the upright frames. Black reinforcements are applied on the bottom part of the coating, at the bigger friction places. The frame is only 160 mm wide and allows for wide openings. The coat is reinforced with horizontal pipes of different diameters (following the wind resistance) granting a strong resistance against the suction. The standard lintel is of only 800 mm, and can be reduced also until 550 mm. The doors have a resistive wireless safety rib as standard that blocks the descent with a very limited pressure on the obstacle, as requested by Norm EN 12453, and also an additional polarized reflex-photocell that is to be installed at a small distance from ground. The motorgear takes only 200 mm at top side (right or left). At the inside of its aesthetic black cover there is the programming card. The coating is of 700 g/m2 of self extinguishing Class 2 polyester coated PVC is available in a wide pallet of RAL colours. Standard transparent window normally 300 mm high, with interruptions of 220 mm in correspondence with the belts, is made at safety height.