3D Viewer

NOVASONIC Plus

Survey Sonica, Ultrasonic, Cross Hole

Manufacturer NOVATEST

The ultrasonic instrument NOVASONIC Plus is the most advanced yet simple to use on the market today.
Main functions:
- SonReb: allows to calculate the resistance of the material (Rc) by inserting the rebound index (IR) medium obtained with the tests concrete hammer
- Calculation of Dynamic modulus of elasticity of the material (Ed) in 3 different formulas using the variables included in the "Physical Parameters"
- Possibility to adjust the amplitude of the transmit pulse from 600 to 1500 volts over which the width of the pulse and the pause time between one pulse and the other
- Damping: input attenuation (dB) to get a clean signal
- GPS (optional)
- Concrete
- Stone Materials
- Natural stone
- Foundation piles, Cross-Hole Tests 
- Cracked masonry
- Long distance control

Further details

TECHNICAL FEATURES
- Display: 10.2" LED Display TouchScreen (1024x600)
- Memory: HD 160 GB
- Operating System: Windows 7
- Sampling: Max 50 MS/s
- Database: memorization setting / A-Scan / Vrms / Time of transit / elastic form / SonReb method
- Interfaces: Ethernet / Wifi / USB
- Passing band: 10 KHz - 1 MHz
- Amplification: 0 to 100 dB with increase minimum of 0.5 dB
- Type of representation: RF - FULL WAVE with visualization of the positive or negative - positive more negative half-wave
- Reject: linear after 0 to 80% screen
- Cursors: Used for the manual reading of the time of transit and to delimit the portion of signal on which make the FFT
- Transmitter: square wave with possibility to adjust amplitude (from 600 to 1500 Volt), width (from 60 nsec. to 206 used.) and number of pulse (from 1 to 6)
- Rhythm of repetition: adjustable 1 o 10 Hz; or automatic
- Fields of measure: from 100 to 10.000 (μs of full scale with linear regulation)
- Test mode: pulse echo and Dual
- Measurements: digital decimal representation of the time of transit with precision ±0,1 μs digital representation energy, measure of the recency response of the signal and his ampleness. Manual measure with cursors on points of the oscillogram (TOF, dBV, FFT)
- Vertical linearity: +/- 0,5 dB
- Horizontal linearity: +/- 1 %
- Power: lithium, autonomy about 8 hours
- Dimensions: 350 x 300 x H 150
- Weight: 4 Kg
- Protection: IP65 to closed container - IP30 to opened container
- Software Visualization: A-SCAN - FFT signal - SONIC DIAGRAFIC - TIME OF TRANSIT - ATTENUATION OF ENERGY IN THE MATERIAL - ELASTIC MODULE
Impact hammer technical specifications:
- Shock hammer equipped with accelerometer for pulse excitation triggering and analysis
- Receiver: wide band accelerometer, microphone or geophones
- Sampling frequency up to 100KS/s
- Programmable frequenxy filters
- Analysis of amplitude and frequency of the signal transmission
- Analysis of amplitude and frequency of the received signal
- Measurement of time of flight
- Analysis STFT (Short Time Fourier Transform) with Gabor spectrogram
ACCESSORIES
Basic kit of supply:
- UT-5200 with transmitter 1500 volt square wave
- Tablet PC with touch screen monitor 10"
- Battery Charger
- No.2 probes P 1" 1/2 frequency 27kHz for contact ultrasonic probe
or alternatively
- No.2 probes P 1 "1/2 frequency 50kHz for contact ultrasonic probe
- No.2 coaxial cables for high voltage BNC-BNC connection for probes L=4m
- No.1 PVC calibration time base
- Manual
- Application software
- USB port for recording and data transfer
Accessories for Cross-Hole (No.2 Automatic Channels):
- No.2 encoder with automatic realignment of cables manageable by the central
- Coaxial cable L=50m
- A pair of support cable guide
- Data management software for diagrafic sonic dBm graph and chart speed
- No.2 probes CC 25 KHz
Accessories instrumented hammer:
- No.1 Piezotronic instrumented hammer
- No.2 signal conditioners
- No.1 Piezotronic accelerometer
- No.1 BNC cable for accelerometer L=8m
- No.1 BNC cable to hammer L=8m
- Software for analyzing signals
- No..2 cables for connection of sensors L=5m
Probes available:
- Probe P 1" 1/2 freq. 27 KHz
- Probe P 1" 1/2 freq. 50 KHz
- Probe P 1" freq. 55 KHz
- Probe P 1" 120 KHz
- Probe stick CM 150 KHz

NOVATEST Catalogues

Videos

Web links

Survey Sonica, Ultrasonic, Cross Hole NOVASONIC Plus - NOVATEST

Survey Sonica, Ultrasonic, Cross Hole NOVASONIC Plus - NOVATEST
MyNDT - Come iniziare una nuova acquisizione tablet/cellulare
MyNDT - Rebar Locator
MyNDT - Test Hammer Survey
MyNDT - Ultrasonic Test
Loading Extra News
Loading event fair
Qr-code
Loading product info request form

Tags