ALGORITMO | Linear lighting profile for LED modules
Linear lighting profile
Recessed fixed round luminaires with high-efficiency LED-module with frame. Recessing ring in polycarbonate. Reflector made from technopolymers with smooth specular metallised coating with an anti-scratch protective layer. The optics system consists of a lighting chamber with integral passive thermal management system, and featured with CREE TRUE WHITE® technology, an intelligent system that guarantees a constant colour temperature and permanent colour rendering index throughout entire service life. High luminous flux: 2000 lm (27W) and 2900 lm (37W) available with warm white (3000K) and neutral white (4000K) tones. Symmetric wide-beam light distribution. CRI > 90. Reflector with glare-control: URG < 19 conforming to EN12464-1 standard. Service life: 50000 hours at 70% luminous flux. Spring system for a tool-free recessed mounting in ceilings with thickness ranging from 1 to 25 mm. Luminaire comes complete with LED-module and DALI dimmable electronic driver. Bridging connection is possible. Dust-protection screen in transparent polycarbonate as an optional extra, installed by simple twist-and-lock mechanism. Complies with standard EN60598-1 and other specific standards.
Floor recessed led lighting system for creating narrow light lines, ideal for structuring of spaces, for outlining the architecture or providing orientation lighting. IP67. Indoor use exclusively. Composed of lighting units with high-power RGB led or monochromatic led in warm white and neutral white, and recessing profile. The extremely compact dimensions allow a minimum visual impact on the architecture, and an easy use even in areas that are difficult to access. Lighting unit in extruded aluminium with anodized finish, sealed with a white opaline permanent tempered glass of 8 mm thick. 3 length options: 600mm, 900mm and 1200mm. Power supply and light management system to be ordered separately. Recessing profile in extruded aluminium to be ordered separately. Available in two lengths (1300mm and 4900mm) to be cut on site to the required configuration. Comes complete with removable cover in recyclable plastic material, that allows a perfectly flush installation. Static load resistance: 5000n. Lighting unit provided with quick-connector system for easy bridging connection. A proprietary low tension bus permits to cover long distances without further feedings. Not suitable for wall or ceiling installation. Complies with standard EN60598-1 and any other specific standards.