Share

BENFER SCHOMBURG BENFERCURE-VARIO-10

Mortar and grout for renovation

Get directly in touch with BENFER SCHOMBURG

Add to wishlist

More on Brand

BENFER SCHOMBURG

Castelnuovo Rangone, Italy
Contact the company
Overview
Name of product/article

BENFERCURE-VARIO-10

Type

Mortar and grout for renovation

BENFERCURE-VARIO-10 Rapid setting and rapid hardening mortars for reparation of concrete degraded structures, for protection against corrosion of reinforcing steel, for concrete superficial protection.

BENFECURE-VARIO-10 and BENFERCURE-VARIO-40 are antisag cement based mortars with the following properties:
• Cement based mortars classified R4, rapid setting and rapid hardening, for reparation of horizontal, vertical and overhead concrete structures
• Water impermeable, it prevent reinforcing steel corrosion
• Impede the passage of CO₂
• Cure with low shrinkage and without cracks even under dynamic load
• Resistant to frost and de-icing salts
• For voids from 2 to 40 mm depth, maximum grain size: 0,5 mm
• Thanks to rapid setting and rapid hardening allows to make small jobs in one day
• Easy to smooth with float or sponge
• Can be sprayed onto the surface
• Water vapor permeable
• Very low VOC emission
• Recyclable as aggregate
• Contains regional aggregates.

Conforms to:
EN 1504-3 CLASS R4, repair and structural recovery of concrete
EN 1504-2 protection of concrete
EN 1504-7 protection against corrosion of steel reinforcement of concrete.

APPLICATIONS
BENFECURE-VARIO-10 and BENFERCURE-VARIO-40 are thixotropic mortars used for renovation of horizontal, vertical and overhead concrete surface profiles in thickness up to 40 mm and for reparation of concrete structures under dynamic load (under roadways, concrete rails). They are suitable for reparation of pillars, of defects like gravel pockets, ramps and industrial floors. Thanks to their properties they allow fast and easy operation because it is not necessary a corrosion inhibitor application to reinforcing steel, there is no need for an additional smoothing mortar and can be finished with a breathable paint after 3 hours only. It possible to mix BENFECURE-VARIO-10 and BENFERCURE-VARIO-40 to get a longer lasting paste.

Further info from manufacturer on BENFERCURE-VARIO-10

You might also like...
Recently Viewed