Share

CALEFFI 7002 Wall-mounting template

Mixing unit and manifold

Get directly in touch with CALEFFI

More on Brand

CALEFFI

Fontaneto d'Agogna, Italy
Overview
Series
Name of product/article

7002 Wall-mounting template

Type

Mixing unit and manifold

The PLURIMOD® EASY user module incorporates the necessary thermoregulation, metering and hydraulic balancing functions for apartments served by centralised heating systems.
The unit comprises a two-way ON-OFF zone valve, a differential pressure control valve, strainer, and adequate air vents, all accommodated in a self-contained compact brass manifold. The product includes the MID certified CONTECA® direct meter.
Two-way regulation, combined with built-in differential pressure control, make Plurimod Easy the perfect solution for use in variable flow rate systems with thermostatic valves. By placing a limit on the pressure head acting on the heating body regulation devices, Plurimod Easy guarantees protection against noise phenomena caused by the excessive pressure head conditions that are typically associated with variable flow rate systems. Maximum flow rate pre-adjustment device that allows better adaptation of the module to the effective capacity requirements of the apartment.
Insulation without thermal bridges and with high vapour diffusion resistance makes this module suitable also for cooling applications.
Its exceptional ease of installation is one of Plurimod Easy's key strengths. Installation is performed by first positioning a template – oriented freely as required – equipped with shut-off valves, insulation and system flushing pipes. The hydraulic module and heat meter are only installed once the work site is in the finishing stages. This solution makes it possible to finish the hydraulic works and flush the system without jeopardising intrinsically delicate components.

Wall-mounting template for use in vertical and horizontal installations.
Complete with:
- 2 pairs of 3/4" M ball valves
- 2 flushing pipes for initial system flushing. Max. temperature 55°C.
- template insulated on the back and the front in black PPE, density 50 g/l.
- support bracket in tecnopolymer with thermal cut-off.
- cardboard to protect against any rubble created during completion of construction work.
- adhesive labels to indicate the flow direction (to be applied).

Further info from manufacturer on 7002 Wall-mounting template

Plurimod® Collection by CALEFFI
You might also like...
Recently Viewed