Share

CAP ARREGHINI KALAHARI

Breathable water-based paint

Get directly in touch with CAP ARREGHINI

Add to wishlist

More on Brand

CAP ARREGHINI

Portogruaro, Italy
Contact the company
Overview
Name of product/article

KALAHARI

Type

Breathable water-based paint

Waterborne paint, adequately breathable, easy to apply, ideal for professional use as it has high compatibility. This allows it to be used to decorate artifacts in various materials that have been appropriately treated.
Suitable for opaque interior painting, it is odorless, semi covering and formulated with acrylic resins in water emulsion. It is suitable for special decorations or "veiling."
Due to its high finesse, it is ideal for interior applications, where it provides a hard, elastic and tough film with high resistance to penetration of stains and dirt. It allows easy cleaning with ordinary detergents (with a maximum strength after 10 days from the application).

Further info from manufacturer on KALAHARI
Further details
Technical Information
PROPERTIES OF THE DRY FILM
GOOD DISTRIBUTION OF STEAM
GOOD IMPACT RESISTANCE
LOW RESISTANCE TO DIRT
GOOD RESISTANCE TO WASH (AFTER 5 DAYS)

COLORS
As per sample. The shade between one batch and another may be slightly different; it is therefore necessary to finish the job with the same batch.

USE
It is indicated, as a finish to create a decorative effect and is especially valuable in public or private areas where special decorations or "veiling” effects are desired.
Using different tools and different background colors you will get different color effects. The best results are obtained with a white or a background with a lighter tone compared to the finishing coat. If you want to increase the color effect you can proceed with a second application of Kalahari. The effect “texture” depends on the dexterity of the applicator and the amount applied and therefore the sample is indicative. Before commencing the work carry out practical tests on a representative panel.
To obtain a homogeneous surface always work with the same tool and work with a single operator for the finishing coat, and make sure to continuously work on wet surfaces on the entire wall without interruption. Tools should be cleaned with water immediately after use.

TOOLS
Roller, brush, sponge trowel, gloves.

THINNING
0-35% with water by volume

COVERAGE
10-12 m2/l per layer

DRYING
An over coat may be applied after 5-8h; Completely dry in 18 h.

APPLICATION TEMPERATURE
+5°C+30°C

STORAGE
+5°C+30°C

Generation Art Collection by CAP ARREGHINI
You might also like...
Recently Viewed