15% off until 2nd April. Use the code SPRING15

15% off until 2nd April. Use the code SPRING15

Share

CAP ARREGHINIELASTO STUCCO

Fibre-reinforced and special plaster

Get directly in touch with CAP ARREGHINI

Retailers list

More on Brand

CAP ARREGHINI

Portogruaro, Italy
Overview
Name of product/article
ELASTO STUCCO
Type
Fibre-reinforced and special plaster
Materials

Filler suitable for filling holes and cracks on interior and exterior walls. This paste is formulated with acrylic elastic copolymers and synthetic fibres and forms a coating resistant to micro cracking. It dries in a quick and homogeneous manner and does not require any pre-treatment. It keeps high elasticity levels over time event at temperatures below 0°C. COLOURS:White. USE:K32 Stucco Fibrato is applied on existing cracks in one or more than one pass without the risk of further cracking. The surface requiring filling must be clean, dry and free from dust and uneven material.  It is used in all cases where water or humidity infiltrations exist or are expected due to cracking caused by settlement or other reasons. Applied using a fabric falsework, it is ideal for non-adhering joints to the substrate or for the repair of very large cracking. TOOLS:Spatula. THINNING:Ready to use. DRYING:Dry to recoat 4-5h; Fully dry 72h. APPLICATION TEMPERATURE:+5°C +30°C. STORAGE:+5°C e +30°C.

Further info from manufacturer on ELASTO STUCCO

You might also like...
Recently Viewed