Share

CAP ARREGHINI B1

Mould remover

Get directly in touch with CAP ARREGHINI

More on Brand

CAP ARREGHINI

Portogruaro, Italy
Overview
Lines
Name of product/article

B1

Type

Mould remover

ANTI-MOULD MASONRY DISINFESTANT
Aqueous solution of a fungicidal agent, chosen due to the wide range of action against different species of moulds and for its very low toxicity. It is a product that, when application is complete, does not present residual unpleasant odours.
It is applied directly on the surface after washing with a high-pressure water jet cleaner.e.

USE
Used as a mould killer treatment for wall surfaces, it must be added to an anti-mould solution for interiors or to an anti-mould seaweed killer solution for exteriors in order to ensure killing of existing moulds. Ready to use with a brush, spray-gun or roller directly on the mould before brushing and then on the entire surface, or with a spray bottle on the walls subject to mould as a preventative measure about every six months, thus guaranteeing less frequent maintenance.
It can also be added, at a rate of approx 0.5%, to diluted paints stored on the work site for prolonged periods prior to use. In this way, greater bacterial contamination produced by dilution is prevented from damaging the paint.

TOOLS

Roller, Brush, Spray.

THINNING Ready to use
DRYING 5-8h
APPLICATION TEMPERATURE +5°C +30°C
STORAGE +5°C +30°C

Further info from manufacturer on B1

Sanacap Collection by CAP ARREGHINI
You might also like...
Recently Viewed