Rust prevention and converter product
Suitable rust inhibitor to prevent corrosion of the ferrous metal surfaces because of its excellent adhesion is also suitable as a primer. It is characterized by high penetration into the surface, hardness and flexibility, able to withstand to the natural variation in size of the surfaces due to changing climatic conditions. Easy to apply by brush, roller or spray has excellent filling capacity, spreading and covering. This provides a solid adhesion capacity to enamels and enhancing coverage. Direct application on zinc, creates a film suitable for corrosion resistance and impact. Can be overcoatable with water based and solvent-based products.
PROPERTIES OF THE DRIED FILM
RESISTANT TO CORROSION
RESISTANT TO IMPACT
ADHESION ON DIFFERENT SURFACES
Colour: Ral 7035.
Between one production and the other the colour may be slightly different, it is therefore necessary to finish the job with the same production.
It is ideal for the protection of new iron structures or structures undergoing maintenance – such as metal structural work, fixtures, railings, barges, tanks or agricultural equipment - subjected to particularly corrosive agents in rural, marine and industrial environments. The thickness recommended for effective protection is established on the basis of the aggressiveness of the environment and the product should always be applied on a scrupulously clean substrate. Can be recoated with water-based acrylic, alkyd and polyurethane enamels and with solvent-based, fast drying, alkyd enamels.
Ideal as an adhesive primer on materials that offer poor adhesion such as galvanized steel, alloys, aluminium, plastic and fibreglass. Adhesion to the substrate is lessened if the product is applied to a damp substrate or in conditions of high ambient humidity. Before being protected, the galvanic zinc coating must be allowed a 2-3 month period of oxidation in the presence of atmospheric agents. It is used as an intermediate layer in the painting cycle with Z Uno in order to guarantee adhesion to the subsequent products. In order to guarantee good adhesion, recoat after 12-16 hours of drying and avoid the use of nitro enamel.
Roller, Brush, Spray.
THINNING 7% with water
COVERAGE 13-15 m2/l
APPLICATION TEMPERATURE +5°C +30°C
STORAGE +5°C +30°C