Share

CAP ARREGHINI CALCE

Silicate paint

Get directly in touch with CAP ARREGHINI

More on Brand

CAP ARREGHINI

Portogruaro, Italy
Overview
Lines
Name of product/article

CALCE

Type

Silicate paint

MINERAL PAINT FOR INTERIORS
Wall lime based mineral paint, easy to apply, with drying times that enable rapid use of living spaces. Due to its chemical nature does not form a film, but hardens by reacting chemically with the surface and thanks its high alkalinity, has a greater resistance to mould than conventional indoor paints.
It is characterized by high diffusion of water vapour such as to ensure the transpiration required to obtain dry walls and avoid condensation of environments subjected to high concentration of water vapour such as kitchens and bathrooms. The high transpiration makes it ideal for finishing of dehumidifying systems.
Its has good coverage and low tendency to splash thus can be applied with manual or mechanical tools which guarantee a finish characterized by a high filling capacity, visual consistency and uniform opacity on large surfaces with backlighting.
PROPERTIES OF THE DRIED FILM
- HIGH COVERAGE
- MATT FINISH
- RESISTANT TO WET BRUSHING
COLOURS
Colour: White.
The range may be extended in shades of the Tucano colour sampler. The colours are feasible with the Arreghini Colors 16 system. Between one production and the other the colour may be slightly different, it is therefore necessary to finish the job with the same production.
USE
It is ideal for decorating and protecting new structures or structures undergoing maintenance that have a variety of substrates such as plasters with different compositions (cement, common lime, pre-mixed), concrete and fibrocement, filler skims and old paint, and in all cases in which a product that meets sustainable building criteria is required, and rapid and economical maintenance is important.  
For spray applications, ensure that the substrate is dust-free and avoid excessive atomization of the product by regulating the pressure, nozzle and thinning so as to ensure that the paint sprayed sufficiently wets the surface.
On substrates subject to biological pollution due to mould, add 2 litres of anti-mould agent A10 for every 20 kg of paint.
To obtain the “fresco” effect, apply lime wash Calce with a roller or brush on the plaster and skim with a stainless steel trowel. Repeat the application for three consecutive times, roughly 1 hour apart from one another.
TOOLS
Roller, Brush, Spray.
THINNING 15-30% with water
COVERAGE 9-11 m2/Kg
DRYING 4-6h
APPLICATION TEMPERATURE +10°C +30°C, U.R. < 75%
STORAGE +5°C +30°C

Further info from manufacturer on CALCE

Mineralcap Collection by CAP ARREGHINI
You might also like...
Recently Viewed