NON-SHRINKING PUTTY FOR INTERIORS
Filler for walls composed of a paste that is suitable for filling holes and cracks for indoor walls. It is a paste composed of “glass bubbles” 3M that, in comparison to other inert material, has a lower surface area in relation to its volume. This has led to the formulation of Stucco Light, which has a low specific weight and high charge: so that, when applied, it does not show cracks and does not shrink or drop.
PROPERTIES OF THE DRIED FILM
RESISTANT TO CRACKING
IT DOES NOT DROP
Different types of surfaces such as plaster, concrete, plasterboard wood in large thickness up to 2 cm with only one pass without any risk of cracking. If the product is too dry, add a few drops of water and mix. The surface requiring filling must be clean, dry and free from dust and uneven material. Apply the product using a spatula on the part that needs to be filled. Stucco Light can be coloured with IP dyes.
Spatula – press the product well and level it thoroughly in order to skip sandpapering. Use a spatula damped with water to level.
THINNING Ready to use
APPLICATION TEMPERATURE +5°C +30°C
STORAGE +5°C +30°C