Water repellent water-based paint
Water-dilutable paint, water-impermeable and moderately breathable, easy to apply, ideal for professional use as it has excellent adhesion properties, filling and covering powers on a wide variety of substrates. High quality paint formulated with siloxanic resins for good protection and colour resistance in outdoor environments. It is characterized by perfect balance between water impermeability and water vapour permeability, so as to guarantee the breathability required for dry walls, thus making it suitable finishes of dehumidifying systems. Thanks to the presence of inert lamellar charges, it presents a moderate levelling capacity. COLOURS:White. The range of colours can be extended using the sample books of the Tintoretto (for interiors only), Tucano, Spazio 100 and Area 115 (for exteriors and interiors) systems with the Arreghini Colors 16 system, and the sample card of the Tucano system with the Idrotema Professionale system. The colour could vary slightly from one production batch to the next; it is therefore important to finish the job with the same batch. USE:It is ideal for decorating and protecting, from atmospheric agents, new structures or structures undergoing maintenance and that have alkaline substrates such as plasters with different compositions (cement, common lime, pre-mixed, skim coat plaster for exterior insulation), fibrocement and old paints, in rural, marine or industrial environments. Strong colours may also be used. It may be used as a finishing on dehumidifying plaster. Although it is compatible with concrete and reinforced concrete, its high level of breathability does not ensure valid protection on exterior surfaces subject to biological pollutants, such as mould, seaweed and moss. For this reason, 1 litre of B25 Antimuffa Antialga or 350 ml of B25 Antialga Concentrato must be added for every 14 litres of paint. TOOLS:Roller, Brush, Spray-gun. THINNING:Roller, Brush: 10-15% by weight with water. Airless Spray-gun: 5 -10% by weight with water. COVERAGE:9-11 sq.m/l (6-8 sq.m/kg) per coat, depending on the type of work process. DRYING:Dry to recoat 4-6h; Fully dry 18h. APPLICATION TEMPERATURE:+5°C +30°C. STORAGE:+5°C e +30°C.