In-line pump

Get directly in touch with Dab Pumps

Retailers list

More on Brand

Dab Pumps

Mestrino, Italy
Contact the company
Name of product/article



In-line pump

Hot or cold water circulation pump with in-line ports, suitable for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Operating range:
from 2 to 67 m3/h with head up to 13,7 metres.
Pumped liquid: clean, free of solids and abrasives, non-viscous, nonaggressive, non-crystallised and chemically neutral, with properties similar to water. Maximum, glycol content 30 % (for other glycol percentages contact Technical Support).
Pumped liquid temperature range: from -15 °C to +120 °C.
Maximum ambient temperature: +40°C.
Maximum operating pressure: 10 bar (1000 kPa).
Standard flanges:
DN 40, DN 50, DN 65, DN 80 - PN 6/PN 10 (4 holes).
Flanges on request: DN 80 - PN 16 (8 holes).
Counter flanges on request:
threaded DN 40, DN 50, DN 65 in PN 10.
welded DN 40, DN 50, DN 65, in PN 10/PN 16 (4 holes).
welded DN 80 in PN 10/PN 16 (8 holes).
Special executions on requests: alternative voltages and frequencies.

Pump body and motor support in cast iron. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can
accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the single version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be used during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously. 

Further info from manufacturer on KLM/KLP/DKLM/DKLP

You might also like...
Recently Viewed