ACTIVE is an automatic pumping system comprising a pump, a motor and an integrated control unit. It is especially suitable for domestic use, small civil, farming or industrial installations, washing plants and leisure activities. The pump may be used to pump rainwater or potable or not-potable water.
The pumps that may be added to this system are:
- JET, JETINOX and JETCOM self-priming pumps or the EUROINOX multi-stage pumps suitable for operation in the presence of air or gas bubbles. These are indispensable when drawing water from artesian wells and when there are problems with priming and suction.
- EURO, EUROCOM multi-stage pumps suitable for very quiet operation in positive suction head installation.
from 0.4 to 10.5 m3/h with head up to 62 metres.
Liquid quality requirements: clean, free from solid or abrasive
contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral, close to the properties of water.
Liquid temperature range: from 0°C to +35°C for domestic use
(EN 60335-2-41). For other use: from 0°C to +40°C
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Special executions on request: different frequencies and/or voltage.
Motor protection rating: IP 44
Terminal block protection rating: IP 55
Insulation class: F
Standard input voltage: single phase 220/240 V / 50 Hz
three phase 230/400 V - 50 Hz.
CONSTRUCTIONAL FEATURES OF THE PUMP
The ACTIVE system is easy to install and ready to use, integrated with the electric pump, which:
• controls it
• runs it automatically
• regulates its operation
• limits its start ups
• ensures pressure stability inside the hydraulic circuit
• enables electronic control of the start up pressure.