Self-priming centrifugal pump

Get directly in touch with Dab Pumps

Retailers list
Add to wishlist

More on Brand

Dab Pumps

Mestrino, Italy
Contact the company
Name of product/article



Self-priming centrifugal pump

Portable self-priming centrifugal electropump for gardening, vegetable gardens, washing and hobbies. Equipped with a handle for easy transport and 2-metre power cable type H07 RN-F complete with plug and switch. Compact and easy to install, self-priming so that it can take up water from tanks, wells or streams, tolerating air bubbles and water with small particles of sand.
Gardenjet:Cast iron pump body and die-cast aluminium motor support.
Garden-com:Technopolymer pump body and die-cast aluminium motor support.
Garden-inox: Stainless steel pump body. Die-cast aluminium motor support.
Technopolymer impeller, diffuser and Venturi tube. Stainless steel seal disc and pressure discs. Carbon/ceramic mechanical seal. Induction motor, closed and cooled with external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Built-in thermal and current overload protection and a capacitor permanently in circuit.
Manufactured according to CEI 2-3 and CEI 61-69 standards (EN 60335-2-41). 

Operating range:
from 0.4 to 5.4 m3/h with head up to 54 metres.
Liquid quality requirements: clean, free from solid or abrasive
contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral, close to the properties of water.
Liquid temperature range:
from 0°C to +35°C for domestic use (EN 60335-2-41).
for other use: from 0°C to +40°C
Maximum suction depth: 8 metres.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
6 bar (600 kPa) only for models in technocpolymer (JETCOM)
Installation: fixed in a horizontal position.
Special executions on request: alternative voltages and/or frequencies.
Motor protection rating: IP 44
Terminal block protection rating: IP 55
Insulation class: F
Standard input voltage: single phase 220/240 V / 50 Hz.

Pump body in technocpolymer and motor support in die cast aluminium. Impeller, diffuser, venturi tube in technopolymer.
Stainless steel wear ring and seal holder. Carbon/ceramic mechanical seal.

Further info from manufacturer on GARDENJET

You might also like...
Recently Viewed