Polyurethane bi-component water-based paint, to use as a finishing for swimming pools and the tanks for drinking water. ADVANTAGE •Resistant to standing water •Protective product for waterproofing system •Resistant to salt •It create a water-proofing film •Long-lasting •Aestheticaly pleasing •No need for periodic maintenance USES Pigmentation and finishing of the superficial layers intended to contain standing water. APPLICATION OF SWIMMING POOLS SYSTEM Perfectly clean the surfaces to coat. Remove powder, oils , etc (do not use with petrol or diesel, but only with solvents). In case of a very damaged surface we suggest mechanical cleaning. 1.Apply by brush a coat of Grip Primer (see technical sheet) 2.Apply two coats of Acriflex Winter with Safety-Joint Roll only in the corners and Polites net onto the concrete bed to obtain a perfectly waterproof surface 3.Apply by brush or roller a first coat of Epokoat Swimming diluting the product with 10% of water 4.Apply a second coat of Epokoat Swimming when the first one is dry. It is advised to apply the second one no longer than 24 hours from the first application, because the two layers may not join perfectly to each other. TECHNICAL DATA Aspect liquid Resistant to salt excellent Resistance to solvent not resistant Resistance to organic acids not resistant Resistance after 50 cycles of freezing/defrosting (-15°C /+15°C) (UNI EN 202) inaltered Specific gravity Kg/Lt 1 Mixing relation part A (1) - part B (0,18) YIELD Kg/Mq 0,350 for 2 coats on a perfectly smooth surface. COLOUR Light blue PACKING Metal can 5 Kg + 0.9 Kg (A+B). STORAGE Store the product in the dark in temperature higher than 0°C. Use by: 12 months.