Solar Water Pump
SOLARWATER is a submersible continuous current pump – low power and high performance pump that may be fed with 24V and 48V, with current absorption of 1A and 4A adapted to the pumping heads of (10 to 150 meters).
The pump operates based on a patented system of opposed pistons driven by cams in oil bath connected to a continuous current motor with permanent magnets and special long-life brushes, fully sealed and isolated from water.
The pump is available in two variants for different flow rate and depth.
The pump may be fed directly by 4 solar panels connected in series (12V-80W or 12V-125W each), or by 1 or 2 panels with nominal voltage 24V connected in parallel, or by batteries. The pump comes with an electronic protection and control unit - MK3 controller. The pump discharge rates vary between 1.980 and 10.050 liters a day. The pump has a diameter of 98 mm and is long between 760 mm and 890 mm, it weighs approximately 13 and 14 kg. The pump is provided with a quick connection for PE pipes sized 25 mm. The pump has been designed for pumping water with normal chemical composition at surrounding temperature; it is possible to adapt the pump for salty water or moderately aggressive water by adding an anticorrosion kit (zinc anode). It's prefered but not compulsery to arrange the pump to operate in vertical position.
Maximum depth - 75 mt
Discharge rate Max. 8.500liters/day at 10m
Voltage 24/48V CC
Pump type Piston pump
Power Max. 320W
Protection device Controller MK 3