The ekinex® thermostats of 71 series range and related accessories offer the possibility to realize several variations that will satisfy the most diverse needs. The base is represented by the device which is fitted with a KNX communication module.
The EK-E72-TP version of the thermostat is suitable for mounting into a flush mounting box, either round or square, provided with fixing holes 60 mm apart, while the EK-E72-TP-...-R version is also suitable for mounting into a rectangular wall mounting box 3 modules according to the Italian installation standard provided with fixing holes 83,5 mm apart. Each thermostat is delivered with its relative metal support which, in case of necessity, can also be ordered separately. A plastic adapter and a terminal block complete the supply.
Depending on the version, the thermostat must be finished off with a square or rectangular plate with 60 x 60 mm window and a square or rectangular frame. The frames are available in two stylish alternatives (form and flank). Plates and frames are in plastic material or aluminium, in several colour and finishing variations. The ‘NF versions of the thermostats are mounted without frame and are provided with a side profile in white or black colour.
The thermostats simply get connected to the unique signal bus cable and do not require auxiliary power supply; the devices are powered at SELV (Safety Extra Low Voltage) voltage, thus offering a much higher safety level than traditional commands. The configuration and commissioning is carried out by means of the ETS® software.