Pushbutton 71 / FORM series
Home automation system
The ekinex® pushbuttons of 71 series range and related accessories offer the possibility to realize several variations that will satisfy the most diverse needs. The base is represented by the device which is fitted with a KNX communication module.
The EK-E12-TP version (a) of the pushbutton is suitable for mounting into a flush mounting box, either round or square, provided with fixing holes 60 mm apart, while the EK-E12-TP-...-R version is also suitable for mounting into a rectangular wall mounting box 3 seater according to the Italian installation standard provided with fixing holes 83,5 mm apart. Each pushbutton is delivered with its relative metal support which, in case of necessity, can also be ordered separately. A plastic adapter and a terminal block complete the supply.
The pushbuttons must be finished off with an operation surface (rockers), a plate with 60 x 60 mm window and a frame. The rockers are available in square and rectangular shapes of different modularities, in plastic material and in three different colours. Each pushbutton has integrated LEDs which can be programmed freely: as an example, as a status feedback or as an orientation light at night time. Two colour combinations are available for the LEDs: blue / green or red / white. The square and rectangular frames are available in two stylish alternatives (form and flank) and share the same choice of materials, colours and finishings as for rockers. The ‘NF versions of the pushbutton are mounted without frame and are provided with a side profile in white or black colour.
The pushbuttons simply get connected to the unique signal bus cable and do not require auxiliary power supply; the devices are powered at SELV (Safety Extra Low Voltage) voltage, thus offering a much higher safety level than traditional commands. The configuration and commissioning is carried out by means of the ETS® software.
• 30 Vdc power supply by KNX bus
• Current consumption from bus < 15 mA