Ekinex Room thermostat FF/Flank series

Home automation system for HVAC control

  • Collection FF
Add to wishlist

More on Brand


Vaprio d'Agogna, Italy
Contact the company


Name of product/article

Room thermostat FF/Flank series


Home automation system for HVAC control

The ekinex® thermostats of FF series range and related accessories offer the possibility to realize several variations that will satisfy the most diverse needs. The base is represented by the thermostats EK-EP2-TP and EK-EQ2-TP (with relative humidity sensor); each one integrates a KNX communication module.

The device is suitable for mounting into a flush mounting box, either round or square, provided with fixing holes 60 mm apart. Each thermostat is delivered with its relative metal support which, in case of necessity, can also be ordered separately. A terminal block completes the delivery.

The pushbuttons must be finished off with an operation surface (rockers) and a frame. The rockers are available in square shape, plastic material or aluminium, in several colour and finishing variations. A special set includes two customized rockers with symbols for the thermostat functions. Each thermostat has integrated LEDs which can be programmed freely: as an example, as a status feedback or as an orientation light at night time. Two colour combinations are available for the LEDs: blue / green or red / white. The square frames are available in two stylish alternatives, form (g) and flank (f), and share the same choice of materials, colours and finishings as for rockers.

The ‘NF version of the thermostat is mounted without frame and is provided with a side profile in white or black colour. The thermostats simply get connected to the unique signal bus cable and do not require auxiliary power supply; the devices are powered at SELV (Safety Extra Low Voltage) voltage, thus offering a much higher safety level than traditional commands. The configuration and commissioning is carried out by means of the ETS® software.

The ekinex® room temperature controller of FF series regulates independentently the temperature of a room or a zone. In combination with one or more KNX actuators, the room temperature controller is able to control the heating and cooling emission of a series of terminal units for the thermal exchange (such as radiators, fan-coils, floor and ceiling radiant panels, etc.). The device is provided with a LC-display with adjustable backlight, sensors for temperature and brightness measuring and two freely configurable inputs.

Technical data
• 30 Vdc power supply through KNX bus
• Current consumption from bus < 13 mA

Further details
• LC-Display with adjustable backlight
• 2 rockers for controlling thermostat functions
• 4 freely programmable LEDs for each channel
• 2 colour combination available for the LEDs (blue/green or red/white)
• Integrated temperature, relative humidity and brightness sensor
• 2 freely configurable inputs
• Plastic casing
• Connection to bus line with KNX terminal block
• Frontal programming pushbutton and LED
• Wall-mounting installation on round or square wall box
• IP20 protection degree (installed)
• Weight 85 g (with mounting support)

FF Collection by Ekinex
You might also like...
Recently Viewed