Network analyser

Get directly in touch with Ekinex

More on Brand


Vaprio d'Agogna, Italy
Contact the company
Name of product/article



Network analyser

The ekinex® network analyzer EK-ME1-MDB is a three-phase multifunctional instrument for measurement and recording of electrical parameters with separate inductive and capacitive counters. Delivery includes a digital output (DO) and a RS485 serial port for communication over Modbus RTU/ASCII protocol. Possibility to update the firmware version remotely is given. The device is suitable for mounting on a 35 mm DIN rail; it requires an auxiliary power supply.

Further info from manufacturer on EKINEX® EK-ME1-MDB
Further details
Power supply
• Voltage range: 85...265 Vac
• Max consumption: 1,6 VA - 1 W
Voltage inputs
• Voltage range: 3x10 / 17 ... 3x285 / 495 Vac, Cat III 300 V
Current inputs
• Maximum value: 6 A
Digital output (DO)
• Type: Passive optoisolated
• Maximum values (according to IEC / EN 62053-31): 27 Vdc - 27 mA
• Fully bidirectional four quadrants measurements for all energies and powers
• Main electrical parameters measured and displayed for a cost effective consumption analysis
• Version for 1 or 5A CT
• 1 MB for data recording
• Possibility to record average values for active & reactive powers
• Modbus RTU / ASCII communication by RS485 port
• Possibility to manage the instrument in remote mode by WintoolNETME1 software
Main features
• Plastic casing
• Backlighted LC-Display, 43 x 29 mm 3 rows, 4 digits + symbols
• Keyboard: 3 front buttons + 1 protected button
• Screw terminal blocks connection
• Installation on 35 mm DIN rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• Protection degree IP20 (installed device)
• Weight 310 g

You might also like...
Recently Viewed