The Acoustics Division can supply not only various products to insulate buildings against sound, but also a wide range of services aimed at our Customers, in particular Designers and Companies. Our Company is available also to individuals who might have to solve various different problems due to noise.
Various ticknesses and different weights underwent many further university tests, including the CREEP test and the Dynamic Stiffness test that determine the performance of reference
for the sector, such as: the durability over time under the weight of the screed and the elasticity of the product.
Needless to say, the results proved better than our previous products, which, still today, are the only reference for the entire acoustic sector: the challenge was to exceed our own
expectations. We succeeded in this, and even reduced production costs by 30%.
TXT® from “Acustica Sistemi by Eterno Ivica” will become the basis for all our bonded fabrics: it can be used for impact underlay and subfloors, false ceilings and partition walls, cavities and anti-reverberation solutions. Therefore, the new TXT® is not only an excellent resilient material but it can also be used as a potential sound absorbing solution.
TXT®: Acustica… Again.
Soundproofing panel suitable for stratified brick walls, composed of a 12 mm thick double layer of wood fiber interposed with a 20 mm sound-absorbing TXT element.
The TXT element is made of non woven white fabric, obtained from a mixture of sanitized and sterilized filaments of cotton, linen and wool, glued into sheets with adhesive polypropylene.
The Sonarwood TXT th. 45 mm soundproofing panel is manufactured using recycled materials and is fully recyclable when the building is taken down.
Instructions for installation:
After laying the initial brickwork and the rough coat (always recommended), install the Sonarwood panels over the whole brick surface, laying the panels side by side, without any gaps.
The perfect continuity of the panels can be ensured by using sealing tape on the joins between the panels, which can be attached to the bricks with plastic mechanical anchors, glue or staples.
The Sonarwood TXT panels can be mounted without an anchoring structure, using utmost care to ensure that no gaps are left between the panels.
Particular care must be given to the points where the brick wall meets reinforced concrete columns, where special precautions must be employed to prevent acoustic bridging.
We recommend to build the second brick layer at the distance of 1 cm from the Sonarwood TXT covering.